Old factory electro-hydraulic push rod | DYT series electro-hydraulic push rod | Reliable quality

Old factory electro-hydraulic push rods,

series electro-hydraulic push rods, reliable quality
1. Overview
, Model series electro-hydraulic push rods are suitable for applications that require repeated pushing and straightening. (or reciprocating a certain angle) motion can also be used in places where work needs to be raised, lowered or clamped, and can be used for centralized or program control in remote, high-altitude and dangerous areas. It has been widely used in metallurgy, mining, coal, electric power, machinery, grain, cement, chemical industry, water conservancy, transportation and other departments, and is a universal power source.
2: Compared with electric push rods, air cylinders and hydraulic cylinders, this product has the following advantages: It can be started with load, while electric push rods are very difficult.
. It has overload protection capability and will not damage the motor and mechanical parts.
The pushing and pulling force of the same electro-hydraulic actuator can be adjusted wirelessly, so the driving force range is wide, which is incomparable with electric actuators and gas actuators.
,
When the thrust and speed are the same, the electrical energy consumed is only half of that of the electric push rod.
,
This product adopts full hydraulic transmission, which is sensitive in action and smooth in operation. It can effectively buffer external impact force. Accurate stroke control cannot be achieved by cylinders and electric push rods.
,
The electro-hydraulic push rod adopts a fully enclosed structure integrating machinery, electricity and hydraulics. The working oil circuit circulates in a pressureless closed steel cylinder. It is small in size and does not leak oil, making it easy to install and maintain. In harsh working environments, it does not absorb dust, does not enter water, does not corrode internally, and has a longer service life than cylinder electric push rods.
,
The investment is small. The cylinder requires an air compressor station, the hydraulic cylinder requires a hydraulic station, and the electro-hydraulic push rod does not require any ancillary equipment
Three
Working principle and structure introduction:
The electro-hydraulic push rod is mainly composed of six basic elements such as the type of push rod, the protection level of the motor, rated output force, stroke, rated speed and angle of use. It can also be equipped with three types of adjustments according to the special requirements of the user. Functions, namely: speed adjustment, push-pull force adjustment, stroke adjustment (stroke switch positioning). In addition to the above three adjustment functions that must be clearly stated when ordering, please refer to the model preparation method and carefully fill in the six basic elements.
Taking the

electro-hydraulic actuator as an example, we will explain how to select and model the model.
How to select a model: A certain place needs an integral straight electro-hydraulic push rod, and the motor is required to be explosion-proof, its maximum thrust
, stroke
maximum speed
, and use angle Push down, then the standard model of the selected electro-hydraulic push rod is:
/(
is an explosion-proof mark,
means push down
)