CCD-908 watch camera

Watch Camera
Operating Instructions Power On/Off
Short press the power button to turn on the camera. The camera will start system initialization (at this time the red and blue lights will be on). After the initialization is completed, the red light will go out and the blue light will stay on. Enter standby mode.
Camera mode
When the watch is turned off, press the power button and the double lights will turn on. After the system is initialized, the red light will go off and the blue light will stay on. At this time, the camera will enter standby mode. Short press the power button. , the blue light flashes. In order to save power, it flashes three times in total and turns off the light. At this time, the camera has entered the recording process. During recording, short press the power button, the blue light stays on. At this time, save the file and stop recording, and return to standby. state. In order to better preserve files, the camera saves a file every five minutes.
Note: The recording is a loop recording. Please save the files that need to be saved before to avoid being overwritten by subsequent files.
Photography Mode
In standby mode, short press the photo button to take a photo. Each time you press the photo button, the blue light flashes once to take a photo and store it, and return to the photo standby mode.
Motion detection camera
In standby mode, long press the camera button to enter motion detection camera. The two lights flash at the same time. In order to save power, they flash three times in total. The two lights go out. At this time, the camera has entered the motion detection camera. In motion detection photography, when an object moves within the camera range, the camera is started. When the object leaves the camera range, the camera is paused. Waiting for the next moving object to appear, the camera will be started again, and the cycle starts again. This can significantly save disk space. Long press the camera button again to return to standby mode.
Note: The recording is a loop recording. Please save the files that need to be saved before to avoid being overwritten by subsequent files.
Removable disk
Use the B extension cable equipped with this machine, first connect the B port of the machine, and then connect the other end to the B interface of your computer. At this time, the computer will pop up the removable disk logo. You can also find the drive letter of the removable disk in My Computer. When the machine is connected to the computer, the machine has started to work as a removable disk of the computer. You can view, transfer, copy, and delete files through the computer very conveniently.
Computer web camera function
First, you must install the camera driver in the included CD on your computer. Put the included CD into your computer's CD-ROM drive and run... in the CD to install the camera driver. After installing the camera driver, you can use the computer camera. Press and hold the camera button, connect to the computer, and the machine enters (webcam) mode. In this mode, you can conveniently video chat with friends, take photo stickers, etc. Open the webcam screen: Double-click My Computer rrr. (Note: The machine must be connected to B in the powered-on state to enter the webcam function)
Charging
Connect the computer B interface or charger to charge the camera Charging, when the battery is in charging state, the red light flashes, when the battery is fully charged, the red light goes out: Note: The camera has a built-in high-capacity polymer lithium battery, no memory effect, and can be charged at any time, but the first five used initially times, please charge the battery to saturation after use up to activate the battery's maximum capacity and obtain standard working time. In order to maximize the battery's power storage capacity, each time you charge, please continue charging for 3 to 30 minutes after the indicator light indicates full charge.
Time modification
The camera provides the function of displaying the recording time in the video file. You can set the time according to actual needs. The time format is year.month.day:hour:minute:second. The setting method is as follows, connect to the computer, find the removable disk, right-click on the blank space of the disk, move the mouse to the new rrr text document on the pop-up menu, name the document (letters must be lowercase), and its extension is. You can also create such a folder on your computer desktop as described above and copy it to a disk folder. Open the folder and set the time format such as: .. ::, with spaces separating the year, month, day and hour, minutes and seconds. Then save. After saving the file, safely exit the hardware, turn on the computer, and complete the time setting. After the time is set, the time of the video file will be the same as the time you set. Note: After the time is set, it must be turned on before it takes effect.
Exception Handling
When the camera storage space is insufficient, the green light and red light will flash simultaneously for about 3 seconds, then the current image file will be automatically saved and the power will be shut down. If you want to continue to use the camera, back up all the data on the computer. Image files are required and old files in the memory are deleted to free up enough storage space.
When the battery of the camera is low, it will automatically save the current image file and shut down after the red light flashes about 3 times. If you want to continue using the camera, please charge it before use.