Volkswagen car key camera

Volkswagen car key camera
: On and off
Long press the power button (picture) to turn on the camera, the camera will start system initialization, the red and blue lights will turn on. After the initialization is completed, the red light will stay on and enter the default video, photo, and recording modes. In standby mode, in any state after turning on the phone, long press the power button (picture) to save the file and turn off the phone, the red light will flash twice.
:Photography mode
Insert the card (picture), turn on the phone, and after the system initialization is completed, the machine is in the default camera mode, photo mode, and recording mode. Short press the (picture) button to take pictures. Each time you press the (icon) button briefly, the red light flashes once to take a photo and store it, and then returns to the default camera mode, photo mode, and recording test mode standby state.
Camera mode
When the machine is turned off, insert the card (picture), long press the power button (picture), the red and blue lights will be on. After the system is initialized, the red light will be on. At this time The camera is in the default camera mode, photo mode, and recording mode. Press and hold the (picture) button. At the same time, the red light flashes twice and turns off. At this time, the camera has entered the recording process. Short press the (picture) button. The red light is always on, then save the file and stop recording, and return to the standby state of camera mode, photo mode, and recording mode. In order to save files more safely, one file is saved every minute or so during recording. After the file is saved, the recording of the next video will continue.
Note: When recording, this machine has a loop recording function.
:Motion detection
When the machine is turned off, insert the card (picture), press and hold the power button (picture), the red and blue lights will turn on. After the system is initialized, the red light will stay on. At this time, the camera is in the default camera mode, photo mode, and recording mode. Press and hold the (picture) button, and the red and blue lights will flash twice and turn off. At this time, the camera has entered the motion detection state and has detected When the object is moved, the blue light flashes once to start the mobile video recording function. Short press (picture) to start recording, and the red light will stay on. Save the file and stop recording, and return to camera mode, photo mode, and recording mode. standby mode. In order to save files more safely, one file is saved every minute or so during recording. After saving the file, the recording of the next video will continue
: Removable disk:
Use the B extension cable equipped with this machine and connect it first Connect the B port of this machine to the B port of your computer. At this time, the computer will pop up the removable disk logo. You can also find the drive letter of the removable disk in My Computer. When the machine is connected to the computer, the machine has started to work as a removable disk of the computer. You can view, transfer, copy, and delete files through the computer very conveniently. The image files of this machine are saved as: *disk\_\. When you need to uninstall the machine, please click the removable device icon on the taskbar in the lower right corner to uninstall the removable storage device. After the system confirms that the hardware can be safely unplugged, disconnect the machine from the computer.
Note: Depending on the computer configuration or system differences, the time for identifying the removable disk will be slightly different. Please wait patiently. It is best not to operate the camera during this period to avoid affecting the computer recognition hardware. If it is not used for a long time, The removable disk is recognized, please try to re-insert it. If the hardware is still not recognized, please confirm that your operating system, driver, B interface, and connecting cable are all normal. To avoid causing damage to the machine or computer, please strictly follow the specifications. To connect and uninstall the machine, you must first use the B extension cable that comes with the machine to connect to the B port of the machine, and then connect to the B port on the computer. When uninstalling, when prompted that the device can be safely removed from the system, first Disconnect B on the computer, and then disconnect B connected to the machine
:Computer network camera function:
First, you must install the camera driver in the included CD on your computer. Put the included CD into your computer's CD-ROM drive and run... in the CD to install the camera driver. After installing the camera driver, you can use the computer camera. Press and hold the camera button, connect to the computer, and the machine enters (webcam) mode. In this mode, you can conveniently video chat with friends, take photos of photos, etc. Open the webcam screen: Double-click My Computer rr. (Note: The machine must be connected to B in the powered-on state to enter the webcam function) In order to avoid damage to the machine or the computer, please strictly follow the specifications to connect and uninstall the machine. When connecting, You must first connect the B extension cable that comes with the machine to the B port, and then connect it to the B port on the computer. When uninstalling, when prompted to safely remove the device from the system, disconnect B on the computer first, and then disconnect B
connected to the camera: Charging:
Connect the B interface of the computer or charger to charge the camera. When the battery is charging, the red light flashes. When the battery is fully charged, the red light The light goes out: Note: The camera has a built-in high-capacity polymer lithium battery, which has no memory effect and can be charged at any time. However, for the first five times of initial use, please use up the battery and then charge it to saturation to activate the maximum battery capacity and obtain Standard working hours. In order to maximize the battery's power storage capacity, each time you charge, please continue charging for 3 to 30 minutes after the indicator light indicates full charge. In order to avoid damage to the machine or computer, please strictly follow the specifications to connect and uninstall the machine. When connecting, you must first connect the B extension cable that comes with the machine to the B port of the machine, and then connect it to the charger and the B port on the computer. When uninstalling, when prompted that it is safe to remove the device from the system, first disconnect B from the charger or computer, and then disconnect B from the machine
: Time modification:
The camera provides The function of displaying the recording time in the video file. You can set the time according to actual needs. The time format is year.month.day:hour:minute:second. The setting method is as follows, connect to the computer, find the removable disk, right-click on the blank space of the disk, move the mouse to the new rrr text document on the pop-up menu, name the document (letters must be lowercase), and its extension is. You can also create such a folder on your computer desktop as described above and copy it to a disk folder. Open the folder and set the time format such as: .. ::, with spaces separating the year, month, day and hour, minutes and seconds. Then save. After saving the file, safely exit the hardware, turn on the computer, and complete the time setting. After the time is set, the time of the video file will be the same as the time you set. Note: After the time is set, it must be turned on before it takes effect.
Three: Exception handling
) When the camera storage space is insufficient, the current image file will be automatically saved and the camera will be shut down after the blue and red lights flash at the same time for about 3 seconds. If you want to continue to use the camera, Back up the required image files on your computer and delete old files in the memory to free up enough storage space.
) When the battery of the camera is low, it will automatically save the current image file and shut down after the red light flashes about 3 times. If you want to continue using the camera, please charge it before use.
3) When the camera stops responding due to accidental improper operation or other special reasons, press the reset button to turn off the power, then turn it back on before using it again.
) Unable to turn on: Check whether the battery is charged. Please charge and press the reset button to turn off the power, then turn it back on before using it again.
) No recording: There are too many bad files in the memory card. Please format the disk before using it.
) Not connected to the computer: Please confirm whether your operating system, driver, B interface, and connecting cable are all normal.
Four: Precautions
Usage scenarios: Please strictly abide by relevant national laws and regulations, and do not use this product for any illegal purposes, otherwise you will be responsible for the consequences.
About the battery: As the use time increases, the battery working time shortens. If it has not been used for a long time, please fully charge it before use.
When the actual capacity of the player is slightly smaller than the nominal capacity, it is normal!
File security: This product is not a professional storage device and does not guarantee the integrity and security of internally stored files. Please back up your important files immediately on a computer or other storage device.
Recording quality: This product is not a professional recording equipment, and there is no guarantee that the effect of the recorded files will meet your expectations.
Working temperature: -℃
Working humidity: -, please do not place the product in a humid working environment. The product is not waterproof.
Shooting illumination: Please use it in an environment with sufficient light. Do not point the camera directly at the sun or other strong light sources to avoid damage to the optical components.
Cleaning requirements: Do not use it in an environment with excessive dust density to prevent the lens and other parts from being contaminated with dust and affecting the camera effect. The lens can be gently wiped with lens paper or glasses cloth to keep it clean.
Other matters: This product is a precision electronic product. Do not subject it to strong impact or vibration: Do not use it under strong magnetic fields or strong electric fields.
Disposal: Please pay attention to environmental protection and do not discard this product at will. It is prohibited to throw this product into the fire to avoid explosion
Mingrui Electronic Technology sells a series of secret surveillance cameras such as watch pinhole cameras, clothes hook micro cameras, car key cameras, lighter pinhole cameras, and desk clock pinhole cameras. The equipment is suitable for reporters’ undercover interviews, marriage investigations and other major industries!