Taiwan SC camera watch

Taiwan
Camera Watch
Instructions for use
.Power on:
Press and hold the power/camera button for about 3 seconds, the red and blue lights will light up at the same time, then the red light will go off and the blue light will stay on. Enter the standby state
. Video recording:
When the Taiwan HD camera watch is in standby state, short press the power/camera button. The blue light will flash three times and then go out, indicating that recording has started. Short press any time during recording. The blue light of the button will flash three times, indicating that the video is being recorded. When the blue light flashes, short press the power/recording button to save the current video file and enter the standby state
3. Taking pictures:
High-definition in Taiwan When the camera and camera watch is in standby mode, short press the camera button and the red light flashes once, indicating that a photo has been taken and the photo is saved in the folder in the format.
Note: When taking pictures, the correct orientation is when the o'clock position is facing down
. Shut down:
When the Taiwan HD camera watch is in standby or recording mode, press and hold the power/record button for three seconds. The red light will flash three times and the phone will shut down
In the standby state of the Taiwan high-definition video camera watch, the machine will automatically shut down after three minutes of inactivity.
.Reset button: If there is a crash, please press and hold the camera button first, and then press the power button to reset.
.Charging:
) Taiwan’s high-definition video camera watch has a built-in rechargeable lithium battery. You can connect the B plug on the watch to the charger or plug it into the B interface of the computer to charge. After being connected correctly, the red light of the camera watch will stay on and the blue light will flash, indicating that it is charging. When the blue light will stay on, it means that the battery is sufficient, please stop charging.
) When recording or taking photos, if the battery power is low, the blue light will flash quickly and the camera will automatically shut down. The system will automatically save the file before shutting down, and then shut down again to ensure the safety of the files.
. Modification of recording date and time:
Connect the Taiwan high-definition camera watch to the computer, open the update time tool (r.) provided, directly start the update button, and the tool will automatically update the computer's system time Update to the camera watch, then disconnect the computer and turn on the machine normally.
.Web camera function:
When the Taiwan high-definition video camera watch is turned off, press the camera button and insert the b cable to connect the watch to the computer. After the correct connection, the blue light will stay on, and it will appear after you have installed it. In the case of the driver, you will find the r device in My Computer, and then you can use this machine as a camera.
.Camera driver installation:
Put the included driver into the CD-ROM drive and install the camera program (_Installer.) to your computer.
Mingrui Electronic Technology sells a series of secret investigation and monitoring equipment such as watch pinhole cameras, clothes hook micro cameras, car key cameras, lighter pinhole cameras, desk clock pinhole cameras, etc., which are suitable for reporters’ secret visits, marriage investigations, etc. industry sector!