Gun barrel type 900g Mingzun foam glue

Mingzun
Foam caulking is recommended
for use in construction projects, especially the installation of doors and windows. Its excellent thermal insulation performance ensures energy saving, and its high degree of adhesion and elasticity ensures a strong and waterproof seal. This product is a semi-rigid closed-cell foam. The volume of the foam expands rapidly after it is sprayed out. It can be filled freely according to the shape of gaps and cavities. It cures quickly, has a large foam volume, and can be extended by meters. This product is recommended for use in areas with higher relative humidity.


Scope of application:

Filling of doors and window frames and filling of installation cracks and holes. Sealing air conditioners and exhaust fans to prevent dust, pests, and air infiltration. Caulking holes in exhaust fans, sealing and insulating pipes and sewers, installing and positioning soundproof electrical switch boxes, insulating bathtubs, filling cracks in wire outlets, and filling various non-standard fragile items. The shock-proof packaging can fill roof cracks, waterproof and insulate, block the bites of various pests, and prevent rats from entering pipes, holes, etc.

R:

,,r'r, 'r',b'bbrrbrrr,



Product features:

Construction temperature tank: +℃-+3℃

Environment: +℃-+3℃ Foaming multiple: times

Optimum construction temperature: ℃+℃

Temperature resistance range after curing: -℃+ ℃

Surface dry time: - minutes Cutting time: - minutes

This data is tested under laboratory conditions at 3℃. Relative humidity




Instructions for use:

. Before construction, remove floating ash and oil stains on the construction surface, and Spray a little water

. Shake the material tank up and down several times, turn the material tank upside down and rotate it to the spray gun connection port

. When using, turn the material tank upside down and turn it from bottom to top. When spraying foam on the ground, generally you only need to fill the joints - (the foam will expand slightly)

After ten minutes, the surface will begin to solidify. Wait for about a minute to remove the excess foam.

.This product is not UV resistant, so it is recommended to use other materials for coating on the cured foam surface, such as: cement mortar, paint, etc. (can only be painted an hour after construction)
< br/>

.,r,.rr

.br.r

..r,,-(bbb)

.rr,br

.,rr:（）