Pig manure dehydrator processing assistant

TCJ-1：

长2100mm 宽1100mm 高1620mm

TCJ-2     ：

长2100mm 宽1100mm高1620mm

TCJ-3 ：

长2100mm 宽1100mm高1620mm

Pig manure has a finer texture and contains more organic matter and nitrogen, phosphorus and potassium nutrients. Pig manure decomposes slowly and is suitable for use as base fertilizer. One pig's manure can increase the yield of kilograms of grain. But people usually think that pigs are very dirty animals. In fact, pigs love to be clean. In the pigsty, pigs have fixed places for eating, drinking, sleeping, and sleeping. Under modern pig raising conditions, pig manure treatment is a key environmental protection technology, otherwise it will cause environmental pollution. After the scientific treatment of Gymboree fertilizer starter, pig manure can be added into high-quality organic fertilizer to achieve zero pollution, zero emissions, and no odor, turning the manure into gold.
The dried manure after being processed by the pig manure dehydrator has almost no odor, and the water cannot be grasped by hand, so it can be directly packed into bags. However, farmers who invest in pig manure dehydrator are still more concerned about the price of pig manure dehydrator. In the local government's With the cooperation,
the first choice is to use the special non-clogging submersible cutting pump matched with the equipment to lift the pig manure sewage from the pig farm to the pig manure dehydrator, and then the pig manure water is gradually pushed to the front of the machine by the auger , while continuously increasing the pressure at the front edge of the machine, forcing the moisture in the material to squeeze out of the mesh screen under the action of the side pressure belt filter and flow out of the drainage pipe. The work of the pig manure dehydrator is continuous. The pig manure water is continuously lifted into the pig manure dehydrator body. The pressure on the front edge continues to increase. When it reaches a certain level, the discharge port is pushed open and squeezed out. Extrusion port to achieve the purpose of extrusion and discharging. In order to control the discharging speed and moisture content, the counterweight block under the main machine can be adjusted to achieve a satisfactory and appropriate discharging state.