Year1
- TCJ-1：
- 长2100mm 宽1100mm 高1620mm
- TCJ-2 ：
- 长2100mm 宽1100mm高1620mm
- TCJ-3 ：
- 长2100mm 宽1100mm高1620mm
The main features of cow dung [[Dehydrator]]: Cow dung dehydrator has small size, low speed, simple operation, convenient installation and maintenance, low cost, high efficiency, environmental protection, energy saving, emission reduction, no need Add any flocculant and other features. The dehydrator uses high-strength spiral shaft, corrosion-resistant alloy spiral blades, and screen mesh made of high-quality stainless steel. The spiral dragon blades are treated with special technology (the thickness of the screen mesh is twice as thick as similar products) The service life is 3 times that of other similar products.
The separator continuously pushes the waste water to the front of the main machine, and the pressure in front of the main machine continues to increase. When it reaches a certain level, the discharge port is pushed open and squeezed out. mouth to achieve the purpose of squeezing and discharging. The working principle of the cow dung [[Dehydrator]]: the cow dung treatment pumps the dung water to the host through a non-blocking slurry pump, and pushes the dung water to the front of the host through the extrusion screw auger. The moisture in the material is extruded through the counterweight block under the main machine under the action of the side pressure belt filter, and the working efficiency and moisture content can be adjusted according to user needs.
Everyone wants to ask: Why should cow dung be dehydrated? Because cow dung contains a lot of viscous substances, if solid-liquid separation and dehydration are not carried out, it cannot be dried in the sun. The large amount of viscous substances blocks the evaporation of water in cow dung. Even if the center part of cow dung is fermented, it will not be dried. Therefore, in order to ensure the further processing and utilization of cow dung, solid-liquid separation and dehydration are required. The moisture content of cow dung after solid-liquid separation and dehydration treatment has dropped significantly. The cow dung will lose moisture after being aired for a while. Making cow dung into fuel is not only a biomass fuel project encouraged by the state, but also the best way to solve the environmental problem of cow dung. It can replace coal and produce a combustion value of 3-kcal. There is no peculiar smell during the burning process and the burning time is long. It can be used for boilers in bathhouses, canteens, schools, etc., for civil heating, cooking, and biomass power plants.
What is the use of dehydrated cow dung? How to dry cow dung, how to process and use cow dung? Cow dung [[Dehydrator]] Cow dung fuel rod machine. With the rapid development of large-scale cattle raising industry, cattle manure pollution has become a major problem. According to relevant data, in some places, the environmental pollution caused by cattle manure has exceeded the total amount of industrial pollution, and in some cases it is even more than twice as high. . A cow produces more than tons of manure every year, and a cow produces between tons of manure. At present, various places generally do not pay enough attention to the treatment of cow dung. In some places where cattle raising is concentrated, there are basically no cow dung treatment facilities. This results in cow dung being piled up and scattered everywhere, especially in the south. Every summer, the stench rises to the sky, which not only has a negative impact on the normal life of surrounding residents, but also is the source of the breeding and reproduction of various bacterial pathogens, which is harmful to the breeding groups. has serious implications. Cow dung can be dehydrated to produce cow dung fuel, which can be used as organic fertilizer and cow bedding material.
The above is the detailed information on the specifications of [[Cow Manure Dehydrator]], which is provided by Shandong Jining Tiancheng Institute. If you have any questions about the specifications of the Cow Manure Dehydrator, please contact the company for further information. Get more information about cow manure dehydrator specifications.
r:
Features of spiral extrusion solid-liquid separator:
Practicality:
This series of machines has fast slag and liquid separation speed, and the moisture content of the separated fecal residue is in -, the slag output and moisture content can be adjusted, and can be used for feeds with different ingredients (such as grass and concentrated feed), which is easy to transport. Its solid particles are very suitable as raw materials for fish feed and organic fertilizer.
Advancement:
This series of machines has strong decontamination ability, no clogging, and is easy to clean. The solid content, chemical oxygen consumption, total oxygen consumption, nitrogen and phosphorus removal rate of the treated feces and urine water can be between -, which is the reason why it is odorless.
Durability:
The frame, screen frame, screen and body of this series of machines are all made of stainless steel, and the auger is made of high-hardness alloy. Corrosion-resistant and more durable than other similar machines.
Economy:
This series has a high degree of automation, easy operation, and low power consumption. The motor configuration uses three-phase 3 volts.
WhatsApp
