Transparent silicone

Two-component addition type mold glue/transparent silicone use: Addition type silicone is used for mobile phone casings, mobile phone models, mold making, etc., used to make molds for casting epoxy resin, polyester resin, polystyrene, vinyl plastic, paraffin wax , low melting point alloys, concrete, etc., are also used for the reproduction of cultural relics and arts and crafts.
Two-component addition type mold glue/transparent silicone operation method:
- Addition type high temperature resistant mail mold glue, the glue has moderate viscosity, can flow, can be cast and brushed, added to the glue The mold made of special components has a maximum use temperature of 3 degrees, good dimensional stability, small shrinkage rate, and will not restore when heated in a sealed environment. The rubber material is two-component. Press: used together for soft molding. Mold manufacturing, etc.
●Features of two-component addition type mold glue/transparent silicone
Low shrinkage, no low molecules are released during the cross-linking process, so the volume remains unchanged and the shrinkage rate is less than
Not limited by product thickness , can be deeply cured
Has excellent high temperature resistance, the temperature can reach 3-degree
Food grade, non-toxic and tasteless, passed food grade certification
High tensile and tear resistance, can be turned over Multiple mold times,
good fluidity, easy pouring, can be cured at room temperature or heated, easy to operate
●Two-component addition type mold glue/transparent silicone use
Used for mold making It is used to cast epoxy resin, polyester resin, polystyrene, vinyl plastic, paraffin wax, large cement components, cultural stone, concrete, etc. It is also used in precision mold manufacturing for metal crafts, alloy vehicles, etc., and food grade mold manufacturing, etc.
●Usage and precautions for two-component addition mold glue/transparent silicone
Mix the two components B according to weight: mix evenly, and then pour after vacuum degassing. The operating time is 3 minutes at room temperature (degrees), and it can be fully cured within an hour. Adding temperature - degrees, it can be completely cured within tens of minutes.
During operation, keep it separate from the container in which the condensed silica gel has been used, and use unused room-temperature silica gel tools to handle this silica gel.
Before use, do a skin test on the mold to see if it will solidify before putting it into use