Electroplating resistive paint and oxidation etching sandblasting protective paint and removable and peelable protective paint

Series of vacuum electroplating resistive paints
Product Description Specially developed for vacuum electroplating resistive protection, it can withstand high temperatures of 3°C, is corrosion-resistant, has good adhesion, is quick-drying and is easy to peel off.
Operation guide: Clean and dry the surface of the workpiece first, make sure there is no oil or dust, and then apply the resist paint to the location that needs to be protected (please use the corresponding thinner to adjust the viscosity, retardant, extra slow drying liquid, quick drying liquid, Dry agent) can be screen-printed, pad-printed, blade-coated, dip-coated, spray-coated, etc. and then dried naturally for about 3 minutes, and dried for 10 minutes at degrees Celsius. After vacuum plating, please use the corresponding cleaner to remove the coating, or peel it off manually.
Precautions Before use, adjust to the appropriate viscosity according to the construction method and use the corresponding diluent. Otherwise, the ink may deteriorate. During construction, please keep the environment ventilated to prevent inhalation.
Special reminder that the technical parameters of this information were measured under the conditions of our company. However, since the conditions and methods of using our products are beyond our control, we cannot guarantee or guarantee the technical parameters and suggestions provided, and our company is not responsible for possible losses and damages. Users are requested to conduct necessary tests before use.
3 Series Acid and Alkali Resistant Insulating Paint
Product Description 3 is an acid and alkali resistant insulating protective paint, specially developed for plating resistance protection of general metals, or corrosion protection during acid etching processing. Such as nickel plating, copper plating, chromium plating, tin plating, etc., are acid corrosion resistant, have good adhesion and leveling properties.
The operation guide first cleans and dries the surface of the workpiece, making sure there is no oil or dust, and then applies the resist paint to the location that needs to be protected (please use the corresponding thinner to adjust the viscosity, retardant, extra slow drying liquid, quick drying liquid, Dry agent) can be screen-printed, pad-printed, blade-coated, dip-coated, spray-coated, etc. and then dried for electroplating. After electroplating, please use the corresponding cleaning agent to remove the coating.
Note 3 Before use, adjust to the appropriate viscosity according to the construction method and use the corresponding diluent. Otherwise, the ink may deteriorate. During construction, please keep the environment ventilated to prevent inhalation.
Special reminder that the technical parameters of this information were measured under the conditions of our company. However, since the conditions and methods of using our products are beyond our control, we cannot guarantee or guarantee the technical parameters and suggestions provided, and our company is not responsible for possible losses and damages. Users are requested to conduct necessary tests before use.
3 Series Oxidation, Etching and Sandblasting Protective Paint
Product Description 3 is an antioxidant protective paint, specially developed to protect the anodizing process, or glass etching, and is resistant to strong acids ( Such as hydrofluoric acid, concentrated acid, etc.), good adhesion and leveling properties. In addition, 3 has extremely strong resistance and is widely used in sandblasting protection processes, both in wet sand and dry sand processing.
The operation guide first cleans and dries the surface of the workpiece, making sure there is no oil or dust, and then applies the resist paint to the location that needs to be protected (please use the corresponding thinner to adjust the viscosity, retardant, extra slow drying liquid, quick drying liquid, Dry agent, and can be used with enhancers) can be screen-printed, pad-printed, blade-coated, dip-coated, spray-coated, etc. Then dried at a temperature of 100 degrees Celsius, it can be oxidized. After oxidation treatment, please use the corresponding cleaning agent to remove the coating.
Note 3 Before use, adjust to the appropriate viscosity according to the construction method and use the corresponding diluent. Otherwise, the ink may deteriorate. During construction, please keep the environment ventilated to prevent inhalation.
Special reminder that the technical parameters of this information were measured under the conditions of our company. However, since the conditions and methods of using our products are beyond our control, we cannot guarantee or guarantee the technical parameters and suggestions provided, and our company is not responsible for possible losses and damages. Users are requested to conduct necessary tests before use.
Series stripping protective paint
The product description is a special protective paint for stripping. The paint is made of special resins, special solutions, etc., and is formulated through special processes. It has the characteristics of not affecting the electroplating surface, acid and alkali resistance, Corrosion resistance and other characteristics. It is often used for strip protection of various workpieces after electroplating. Such as aluminum plating, nickel plating, copper plating, tin plating, chromium plating and other workpieces.
Operation guide: Clean and dry the electroplated surface of the workpiece first, make sure there is no oil or dust, and then apply it to the location that needs to be protected (please use the corresponding thinner to adjust the viscosity, retardant, extra slow drying liquid, quick drying agent , please use in special circumstances) and then dried at ℃, the deplating operation can be performed. After processing, the coating can be cleaned with the corresponding solution, or it does not need to be cleaned.
Precautions Before use, stir evenly at low speed. Please use a special dilution regulator, otherwise the paint may deteriorate. During construction, please keep the environment ventilated to prevent inhalation.
Special reminder that the technical parameters of this information were measured under the conditions of our company. However, since the conditions and methods of using our products are beyond our control, we cannot guarantee or guarantee the technical parameters and suggestions provided, and our company is not responsible for possible losses and damages. Users are requested to conduct necessary tests before use.
R series peelable protective paint water-based
Product brief description Peelable protective paint, specially developed to protect the basic pattern of workpieces and prevent damage during later processing, acid and alkali resistant, corrosion resistant, good adhesion , quick-drying and easy to peel off.
Operation guide: clean and dry the surface of the workpiece first, make sure there is no oil or dust, then apply R to the location that needs to be protected (please use spray agent or retardant to adjust the viscosity) and then dry it at ℃, and you can proceed to the later stage. After processing, the R coating can be peeled off manually or taped off.
Precautions R Before use, stir evenly at low speed. Please use a special dilution regulator, otherwise the paint may deteriorate. The coating film must have a certain thickness to facilitate peeling after processing.
Special reminder that the technical parameters of this information were measured under the conditions of our company. However, since the conditions and methods of using our products are beyond our control, we cannot guarantee or guarantee the technical parameters and suggestions provided, and our company is not responsible for possible losses and damages. Users are requested to conduct necessary tests before use.
Series of alkali-soluble acid-resistant paints
Product brief description is a special-purpose paint that is acid-resistant and soluble in alkali and is produced by the reaction of special resins, special additives, etc. The paint has good workability, good leveling, strong adhesion, and dries naturally. The coating can withstand multiple acid etchings. The film layer has high hardness and is scratch-resistant. After processing, cleaning the ink layer is simple, convenient and environmentally friendly.
Operation guide: Clean and dry the surface of the workpiece first, make sure there is no oil or dust, and then apply anti-acid paint to the location that needs to be protected (please use the corresponding thinner to adjust the viscosity, retardant, extra slow drying liquid, quick drying liquid, Dry agent) can be screen-printed, pad-printed, scraped, dipped, sprayed, etc. and then dried at ℃ for 10 minutes, or dried naturally for more than 3 minutes, then acid etching can be performed. After processing, the workpiece can be washed with water first, and then cleaned with 3-water solution. paint layer.
Precautions Before use, stir evenly at low speed. Please use a special dilution regulator, otherwise the paint may deteriorate. During construction, please keep the environment ventilated to prevent inhalation.
Special reminder that the technical parameters of this information were measured under the conditions of our company. However, since the conditions and methods of using our products are beyond our control, we cannot guarantee or guarantee the technical parameters and suggestions provided, and our company is not responsible for possible losses and damages. Users are requested to conduct necessary tests before use.