Year1
- 粘度：
- 100
- 细度：
- 0.01
- 附着力：
- 100
Ink properties
, flat, good adhesion, gasoline and chemical resistance
, good hand feel, good leveling, smooth surface
, good surface hardness, impact resistance Strong, scratch-resistant
, gasoline-resistant, alcohol-resistant, good chemical resistance
Printing
Use mesh as the mesh, and the coating coverage area per kilogram calculated based on mesh is ~㎡.
The surface drying time naturally evaporates in minutes, the actual drying time is within an hour, and the best performance is achieved after an hour.
． Use matching special diluent to open oil and water
． Wash the net with net washing water.
． Or add matching hardener % to increase adhesion and improve ink film hardness.
． Oven ℃ baking minutes Canon is better.
Test method (after complete drying)
． The adhesive tape sticks to the surface of the ink drawn with hundreds of grids and can be quickly pulled up at an angle without losing oil.
How to use
． It is recommended to use our company's special diluent for dilution. It is not recommended to use slow-drying diluent to dilute. It should be stirred thoroughly before use and sealed at any time after use.
． When stirring, add % of the company's supporting oil and water to dilute it to a suitable viscosity for printing. Use a special diluent for pad printing and clean it with screen washing water for pad printing dilution.
． Do not mix it with other types of inks, otherwise other adhesion, chemical reactions and other adverse phenomena may easily occur.
. The use time limit of ink with curing agent is one hour. Please discard it after it expires. The remaining ink cannot be recycled
Precautions
． The appearance of various printing materials is similar, but they may be different materials. Customers need to test print first to ensure that they meet the requirements before mass production.
． During the pad printing process, if stringing or spreading occurs, you can add some slow-drying paste
. If the ambient temperature is too high, it will affect the original quality of the ink. Anything white will change color. When baking, please use a wooden base to bake, and do not touch iron directly
. According to climate change, please stay away from fire sources and store in a dark and controlled environment
[Performance Test]
, Tape scratch test: % no falling off
, Stamping resistance test: thick aluminum plate&d No change in bending.
Alcohol resistance test: Use absorbent cotton dipped in industrial alcohol with a concentration of 0.0% and the force level can be used several times without discoloration.
[Notes]
First, make a small trial print to confirm that it meets the requirements before mass production.
. Do a good job in removing grease and impurities from the surface of the substrate to promote adhesion.
Testing of adhesion, hardness, acid resistance, alcohol resistance, chemical resistance, scratch resistance, abrasion resistance and other properties,
must be fully cured before testing.
Without permission, this series of inks are not allowed to be mixed or matched with other types of inks.
Fireworks are strictly prohibited when using and storing inks, inks, and thinners.
When using, pay attention to the well-ventilated condition of the construction site and try to avoid direct skin contact.
If this product accidentally splashes into the mouth, nose, eyes, or ears, wash it with plenty of water or seek medical advice directly.
Please see the table below for technical reference numbers
Inspection items and test results Test conditions
Ink linearity scraper fineness meter
Dry film gloss&&d mirror gloss meter
Drying speed Surface dry ℃ or ℃
Solid dry ℃ or ℃
Alcohol resistance no change gram/alcohol cotton back and forth
Adhesion/grid tape peeling
Acid resistance no change immersion% HH
No change in alkali resistance after immersion%HH
No change in salt resistance after immersion%
No change in water resistance after immersion in ℃ tap water
No change in abrasion resistance/load containing sand Rubber back and forth
No change in heat resistance CCH
dbbdbb__
WhatsApp
