ALABINE SM series instrument nameplate ink

< r>B series
Instrument nameplate ink
B series ink is specially developed for printing on industrial meter plates and nameplates made of polycarbonate () material. It is cheap and volatile. Drying ink. This ink is a high-quality ink with high performance and low price.
Promotional uses: printing of automotive letter boards made of polycarbonate () and acrylic resin materials, printing of industrial meter boards, nameplates, etc., as well as printing of B, soft and hard materials, wood products, etc.
Features
Usage: Please use B series special dilution solvent (standard, slow drying, extra slow drying). When printing fine lines, please use special B slow-drying solvent. Polycarbonate (polycarbonate) is prone to cracking with other diluents. . Use a clean cloth with no edges and apply the treatment liquid to wipe the surface of the plastic film. This can effectively remove the grease and dirt on the surface and has no effect on the plastic film itself.
Drying: Dilute with % solvent and print on it. The finger touch time at room temperature is as follows:
Standard solvent: about 10 minutes. Slow drying solvent: about 10 minutes. Extra slow drying solvent: about 10 minutes. Extra slow drying. Dry solvent: Approximately minutes
Note: In order to prevent the residual solvent from causing bad odors when printing on automotive letter boards and industrial meter boards, it is recommended to heat and dry at a temperature above ℃.
Cleaning of the screen: Please use cleaning solvent to wipe and clean the screen.
Color packaging: More than 6 colors to choose from, each canned.