PLATIVE series of peelable protective paints and alkali-soluble acid-resistant inks and stripping protective paints

Tear-off protective paint
Product brief description
Peel-off protective paint is specially developed to protect the basic pattern of the workpiece and prevent damage during later processing. It is acid and alkali resistant, corrosion resistant, and has good adhesion. Quick-drying and easy to peel off.
Operation Guide
First clean and dry the surface of the workpiece, make sure there is no oil or dust, and then apply it to the location that needs to be protected. Please use spray agent or retarder to adjust the viscosity and then dry it at ℃, and you can proceed to the later stage. After processing, the coating can be peeled off manually or taped off.
Notes
Before use, it needs to be stirred evenly at low speed. Please use a special dilution regulator, otherwise it may cause the paint to deteriorate. The coating film must have a certain thickness to facilitate peeling after processing.
Alkali-soluble acid-resistant ink
Product Description
It is a special-purpose ink that is acid-resistant and soluble in alkali and is produced by the compounding reaction of special resins and special additives. The ink has good workability, good leveling, strong adhesion, and dries naturally. The coating can withstand multiple acid etchings, and the film layer has high hardness and is scratch-resistant. After processing, cleaning the ink layer is simple, convenient and environmentally friendly.
Operation Guide
First clean and dry the surface of the workpiece, make sure there is no oil or dust, and then apply the acid-proof ink to the location that needs to be protected. Please use the corresponding thinner to adjust the viscosity. Screen printing, pad printing, scraping, dipping, and spraying can be applied. After drying at ℃ for 10 minutes, or drying naturally for more than 10 minutes, acid etching can be performed. After processing, the workpiece can be washed with water first, and then the ink layer can be cleaned with aqueous solution.
Notes
Before use, stir evenly at low speed. Please use a special dilution regulator, otherwise the paint may deteriorate. During construction, please keep the environment ventilated to prevent inhalation.
Strip protective paint
Product description
It is a special protective paint for stripping. The paint is made of special resins and special solutions through special processes. It has the characteristics of not affecting the electroplated surface and being acid-resistant. Alkali, corrosion resistance and other characteristics. It is often used for strip protection of various workpieces after electroplating. Such as aluminum plating, nickel plating, copper plating, tin plating, chromium plating and other workpieces.
Operation Guide
First clean and dry the electroplated surface of the workpiece, make sure there is no oil or dust, and then apply it to the location that needs to be protected. Please use the corresponding thinner to adjust the viscosity and then dry it at ℃ to proceed with the deplating operation. After processing, the coating can be cleaned with the corresponding solution or not.
Notes
Before use, stir evenly at low speed. Please use a special dilution regulator, otherwise the paint may deteriorate. During construction, please keep the environment ventilated to prevent inhalation.