AGAVURE series water-based screen printing ink self-drying or baking type

< r>R B series water-based screen printing ink self-drying
RB series self-drying water-based ink, water-based system, is formulated with special resins, ultra-fine pigments and fillers. This product has fine colors, excellent leveling and printability. The dry film has strong adhesion, good flexibility and good post-processability. RB series products can provide attached special effects, three-dimensional floating point effects, anti-slip tactile effects, matte leather effects, etc. Environmentally friendly, it complies with EU R standards.
Recommended applications: automotive text boards made of polycarbonate () and acrylic resin materials, printing of industrial meter boards, nameplates, etc., printing of soft and hard materials, wood products, etc.
Features
Instructions for use: Please use a series of special thinners (standard, slow drying, extra slow drying). When printing fine lines, please use a special slow-drying agent. 1. Use a clean and edge-free cloth to apply the treatment liquid to clean the printing substrate and remove surface grease, dust and impurities, etc. to prevent affecting the printing effect. . If fogging occurs during printing, please add an appropriate amount of anti-white water treatment.
Drying property: Use % thinner and then print on it. The finger touch time at room temperature is as follows:
Standard thinner, about minutes slow drying thinner, about minutes extra slow drying thinner, about minutes .
Note: In order to prevent the residue of bad odor caused by residual additives when printing on automotive letter boards and industrial meter boards, it is recommended to heat and dry at a temperature above ℃.
Screen version
Please choose an appropriate screen version, pay attention to sealing the screen during the printing process, and please clean it in time after use.
Color packaging: More than 6 colors to choose from, each canned.
< r>R series water-based screen printing ink baking type
R series baking type water-based ink, water-based system, formulated with special resins, ultra-fine pigments and fillers, etc. become. This product has fine colors, excellent leveling and printability. The dry film has strong adhesion, is tough and wear-resistant, and can resist erosion by light, heat, water, chemicals, etc. R series products can provide additional special effects, such as brushed effect, anti-fingerprint effect, antique effect and electroplating effect. Environmentally friendly, it complies with EU R standards.
Recommended applications: printing of stainless steel, aluminum alloy, tinplate and other related metal products, glass, ceramics, stone, wood and other craft products.
Features
Strong adhesion, tough and wear-resistant, excellent stability and workability, no ink spreading, no shrinkage, special effects, brushed effect, anti-fingerprint effect, antique effect , Electroplating effect, etc.
Instructions for use: Please use a series of special thinners (standard, slow drying, extra slow drying). When printing fine lines, please use a special slow-drying agent. 1. Use a clean and edge-free cloth to apply the treatment liquid to clean the printing substrate and remove surface grease, dust and impurities, etc. to prevent affecting the printing effect. . If fogging occurs during printing, please add an appropriate amount of anti-white water treatment. , used with a series of catalysts of about %, it can effectively improve adhesion, resistance to chemical substances, etc.
Drying method: ℃ drying, about minutes
Screen: Please choose an appropriate screen, pay attention to sealing the screen during the printing process, and please clean it in time after use.
Color packaging: More than 6 colors to choose from, each canned.