Self-drying, treatment-free, alcohol-resistant PE ink

型号：

SPPD

产品质量：

优

付款方式：

款到发货

& Self-drying, treatment-free, alcohol-resistant ink
[Product information]
Product name: Treatment-free ink
Regular colors: red, yellow, blue, black, cyan, etc.
Model specifications
Manufacturer: Kaixian
Packaging description: / barrel
Printing method: silk screen, pad printing
[Product description]
This product uses high-grade imported acrylic resin and high-grade The pigments are combined through fine grinding and processing. Scope of application: After treatment, silk screen printing on melamine board materials, normal temperature, low temperature for hours, no need for baking, excellent adhesion can be obtained.
【Ink Characteristics】
Bright, high hiding power, good adhesion, extremely resistant to alcohol, chemicals, scratch and abrasion resistance, gasoline, alcohol, bending resistance and other characteristics.
Color white, black, transparent varnish, red, yellow, blue, green, dark yellow, lemon yellow, sky blue, orange, lapis lazuli, red gold, silver, flash silver
[Applicable materials]< br/> Mainly used for screen printing of untreated, B, B, nylon, treated, D, HD and B,,, dumb acrylic and other commonly used engineering plastic products.
[Examples of products]
,, B, materials, etc.
[Basic performance]
Substrate: Material
After printing, it will evaporate and dry naturally. It takes minutes to surface dry, and it will dry hard. Hour.
Perform performance test after hours
Test items
Test method/condition
Test results
Alcohol test
Use gram-loaded viscous alcohol (.%) Push the cotton back and forth flatly.
The bottom is not exposed for one time
The bottom is not exposed for one time
Adhesion test
Hundred grid method: cross grid, use tape to peel off at right angles.
No falling off
Friction resistance test
Push back and forth with ordinary rubber loaded with gram force.
The bottom is not exposed
[Instructions for use]
, screen: mesh polyester screen printing plate
, squeegee: it is recommended to use polyurethane squeegee
, reference Dosage: Mesh screen printing is about ㎡/㎏
Solvent selection: fast-drying water, medium-drying water, slow-drying water. Select appropriately due to differences in printing environment temperature, general volume and printing pattern size
. Screen cleaning: Use organic solvents for cleaning (such as screen washing water)
[Drying conditions]
Natural evaporation and drying, it takes minutes for surface drying and hours for actual drying.
[Product packaging]
Kilogram, kilogram, kilogram
[Shelf life]
It can be stored for two years at ℃ and ℃. Avoid exposure to strong light, strong acids, and strong Alkali.
[Notes]
This ink is a single-component self-drying ink, and strict performance testing must be conducted more than one hour after printing.
Stir thoroughly before use and seal at any time after use.
Cannot be mixed with other types of inks.
. Do a good job in removing grease and impurities from the surface of the substrate to promote adhesion.
When using, pay attention to the well-ventilated condition of the construction site and try to avoid direct skin contact.
If this product accidentally splashes into the mouth, nose, eyes, or ears, wash it with plenty of water or seek medical advice directly.