Supply mine heating hot blast furnace

>Mine heating hot air stove
is a special air heating equipment for underground heating. It is a high-efficiency air heating equipment developed to prevent the air inlet shaft from freezing in winter and to supply warm air underground. It is used for air heating at the mine wellhead and can also be used for temperature regulation and material drying in large industrial buildings. This equipment is installed in the main and auxiliary shaft rooms at the wellhead. In winter, the fresh air outside the well is heated by the mine heating unit and then supplemented into the underground wellhead to heat the cold air in the north to above ℃ to avoid freezing at the wellhead and causing safety hazards. Mine heating hot blast furnace equipment consists of hot water type and steam type. The electronic control part is composed of air heater, axial flow fan, casing, electric control cabinet and other components. It can be divided into frequency conversion fully automatic control and manual simple control. Users can choose according to their needs.
The mine antifreeze hot blast furnace equipment produced by Zhengzhou Yongxu Hot Blast Stove Equipment Co., Ltd. only requires a small volume of gas to operate. It has a high heating and cooling rate and is suitable for systems that require continuous air heating for a long time and appendix.
Performance introduction
1. The function of mine heating hot blast furnace equipment
This hot blast furnace equipment is a mine ventilation and heating system that mainly solves the icing phenomenon that may occur at the wellhead in winter due to too low temperatures. The implementation of this technology can control the wellhead ventilation temperature above ℃ to effectively prevent freezing and ensure production safety.
2. Specific Implementation
The core equipment of this heating equipment is the industrial hot blast stove. Set up an air heating chamber next to the wellhead. Install industrial air heaters in air heating rooms. The air inlet of the industrial air heater is connected to the air inlet window of the air heating room through an air duct to send the heated air into the wellhead, and through the automatic control system, the temperature of the mixture of hot air and natural air is guaranteed to be between -°C.
3. Advantages and Features
It has the advantages of fast heating speed and good frost resistance. This product is equipped with a protective net to prevent debris such as straw and paper scraps from entering the heater. To facilitate installation and maintenance, the pipe head adopts a flange. connect.
Company phone number: -
Contact person Zhao Yongqiang
Email: @.
Company address: Zhongyuan District, Zhengzhou City