90 degree angle reducer

产地：

台湾

型号：

WTS040L1-2-8-30

平均使用寿命：

20000小时

Degree angle reducer, bevel gear reducer, Taiwan servo reducer, angle reducer, bevel gear reducer, servo reducer, Taiwan angle reducer, Taiwan bevel gear reducer. Taiwan's D angle reducer has a compact structure and exquisite housing design for easy installation at any angle. ---This model is a ratio angle reducer. The angle reducer has a fixed speed ratio and can be matched with a D helical gear reducer if a higher speed ratio is required.
- -
.
Features of the planetary reducer:

High positioning accuracy: The angle reducer adopts precision grinding gear tooth surface to smooth and precise tooth profile. The gear box, bracket and overall structural design are made of strong materials to ensure high stability and strict quality control.

Second high torque: The bevel gear reducer uses high-quality tapered bearings to enable the output shaft to withstand greater axial and radial loads. In addition, the gear box and bracket are made of strong materials and have an overall structural design.

Three high starting properties: Due to the balanced structural characteristics and high precision and low inertia moment of Taiwan's servo reducer, it can have high starting properties.

4. Low noise: The precision ground gear tooth surface is highly precise and smooth, making the gear run smoothly and with low noise. Use selected lubricating oil: German-made selected synthetic lubricating oil is used instead of the grease lubrication used in general reducers. Due to its good fluidity, the gears can operate under sufficient oil film protection to reduce noise.

Five low tooth backlash: Under precise processing and strict quality control, the standard tooth backlash is ~ arc minutes in one section and ~ arc minutes in two sections. The precision tooth backlash is ~ arc minutes in one section and ~ arc minutes in two sections. Lower backlash can be customized if necessary.

Six easy installation: The connecting plate and input shaft hole size of the servo planetary reducer are designed to be flexible so that the planetary reducer can be combined with the servo horses of various brands.

Seven long lifespan: Maintenance-free: Precision ground gears are made of high-grade nickel-chromium-molybdenum alloy steel, hobbing and deep carburizing and hardening, and then grinding the tooth surface to make the gear highly rigid and the tooth surface smooth and durable. Good grindability. The angle reducer uses high-quality German-made synthetic lubricating oil, which has good fluidity and is rich in extreme pressure anti-pressure agents, so that the various parts in the gear box are fully lubricated and protected. The use of Japanese high-quality non-perishable oil seals ensures good sealing performance. Western European famous brand tapered bearings are used to bear the maximum axial and radial load. The above excellent quality synergy makes the angle reducer long-lasting and maintenance-free.
The correct installation, use and maintenance of the bevel gear reducer is an important part of ensuring the normal operation of mechanical equipment. Therefore, when installing the servo angle planetary reducer, be sure to assemble and use it in strict accordance with the following installation and use related matters.

Before the first step of installation, confirm whether the motor and bevel gear reducer are intact and strictly check whether the dimensions of the parts connecting the motor and the angle reducer match. Here are the positioning boss and input shaft of the motor. Dimensions and fitting tolerances such as the groove of the reducer.

The second step is to unscrew the screw on the dust hole on the outside of the planetary servo angle reducer flange and adjust the system clamping ring so that the side hole is aligned with the dust hole, insert the inner hexagon and tighten. Then remove the motor shaft key.

The third step is to naturally connect the motor to the angle reducer. When connecting, it must be ensured that the concentricity of the output shaft of the bevel gear reducer and the input shaft of the motor is consistent and that the outer flanges of the two are parallel. Inconsistent concentricity may cause the motor shaft to break or the reducer gear to wear.

In addition, it is strictly forbidden to hit with a hammer during installation to prevent excessive axial or radial force from damaging the bearing or gear. Be sure to tighten the mounting bolts before tightening the force bolts. Before installation, wipe the anti-rust oil on the motor input shaft, positioning boss and reducer connection parts with gasoline or zinc-sodium water. Its purpose is to ensure the tightness of the connection and the flexibility of operation and to prevent unnecessary wear.

Before connecting the motor to the Taiwan servo reducer, the motor shaft keyway should be vertical to the tightening bolt. To ensure uniform stress, first screw on the mounting bolts at any diagonal position but do not tighten them, then screw on the other two mounting bolts at diagonal positions, and finally tighten the four mounting bolts one by one. Finally tighten the force bolt. All tightening bolts need to be fixed and inspected with a torque wrench according to the indicated fixed torque data.