Year1
- 产地：
- 台湾
- 型号：
- TSF040L1-5-8-30
- 平均使用寿命：
- 20000小时
- -
.
Overview of the advantages of Taiwan Dinggu D helical planetary reducer ：
Ultra-quiet: unprecedented ultra-quiet Taiwan servo helical gear reducer uses helical gear ratio to spur gear to reduce noise by %
Smooth operation: the tooth direction of the helical gear Compared with the axis of the gear and the straight teeth, the meshing of the teeth is smoother
Low backlash: precision backlash r The precision positioning characteristics of the micro reducer fully demonstrate the characteristics of the high-precision servo motor< br/>
Small size: The smallest among similar products, it is most suitable for occasions with limited equipment space
High strength: The internal components are made of heat-treated high-strength high-quality alloy steel, which is enough to cope with severe Harsh working environment
High efficiency: low-loss precision gear design with transmission efficiency up to %
Complete specifications: unique multi-stage reduction ratio, precise, economical and selective, precise and efficient output planetary gear Type reduction device is the best combination of precision transmission mechanisms such as servo motors and stepper motors
Fully sealed design: Sealed full oil seal design ensures no leakage of lubricating grease. Patented internal gear ring design ensures durability and reduces noise.
Things to note when selecting a helical gear planetary reducer:
The selection of a helical gear planetary reducer should follow the principle of combining applicability and economy. The various technical indicators of the servo helical gear reducer can not only meet the requirements of the equipment but also save costs. Excess or failure will result in cost waste, so the correct selection of helical planetary reducer is very important.
When selecting a helical servo planetary reducer, its structural type, load-bearing capacity, reduction ratio, output speed, axial force, radial force, torsional rigidity, backlash and other internal indicators should also be fully considered. Installation form, working conditions, working environment and other external structures. The following are the most basic requirements for selecting a reducer:
Installation dimensions: that is, the size of the front end of the servo motor. When selecting a servo micro helical gear reducer, the input end of the micro reducer must exactly match the size of the output end of the servo motor.
Reduction ratio: motor rated output revolutions per minute/reduction ratio = how many revolutions the reducer outputs per minute. Helical servo planetary reducers should try to use a reduction ratio as close to the ideal as possible to ensure the ideal speed.
Torque: rated output torque of servo motor (stepper motor is holding torque) * reduction ratio. The rated output revolution of micro reducer must be greater than this value. If it is less than the reducer, the service life will be shortened in serious cases. The shaft will break or the teeth will chip.
Return backlash: Return clearance (accuracy) r (one circle of the output shaft of the helical gear planetary reducer is divided into one degree and one degree = arc minute), which is what we often call the arc minute unit:. The smaller the return clearance, the higher the accuracy and the higher the cost. Users can just choose a reducer that meets their accuracy requirements. Also consider lateral/radial forces and average life. Reducers with large lateral/radial forces are relatively reliable and less prone to problems during installation and use. Usually its average life span far exceeds the life span of the servo motor it is equipped with.
WhatsApp
