kavco JS polymer waterproof coating

< >Polymer cement-based waterproof coating
Polymer cement-based waterproof coating is composed
of a unique and very active polymer
>>with specific high-performance building emulsion glue As a carrier and mixed with a certain proportion of cement, waterproof coatings suitable for different parts can be prepared. This product has excellent adhesion, impermeability, crack resistance, durability and acid and alkali resistance. This product is non-toxic, pollution-free, easy to construct and has significant environmental benefits. It is a new generation of environmentally friendly waterproof material.
Product Features
>. It has a certain degree of flexibility and the waterproof layer has good bending resistance, bending resistance and wear resistance.
>. Being able to carry out construction in a humid environment can shorten the construction period.
>, It has good breathability, excellent aging resistance and good corrosion resistance.
>, non-toxic and harmless, it is a new generation of environmentally friendly product.
>Scope of application
> Can be used in basements, toilets and bathrooms, parking platforms, swimming pools, reservoirs, civil air defense projects, etc.
>, Waterproofing of complex parts of building foundations, channels, dams, internal and external walls, impermeable special-shaped structures.
>Base surface treatment
>The base surface should be smooth, solid and free of sharp corners, floating dust and open water. Oil stains must be removed, and low-dented and damaged areas must be smoothed and the base must be cleaned before construction.
> If there are obvious pores or blisters, you can use powder mixed with water or cement mortar to form a wet ball and smooth it out.
> Before applying the slurry, the substrate should be fully moistened but there should be no water accumulation.
>Construction Technology
> First, pour the slurry into the mixing barrel. With constant stirring by a portable mixer, slowly add the powder into the mixing barrel and stir for at least 10 minutes. Stir thoroughly to form a slurry without clumps.
>Ingredients: Prepare according to a certain proportion during construction
>According to the weight ratio of emulsion glue: cement =: (.-.)
>
> Use a brush or roller brush to directly apply the glue on the base surface, and do not miss the brush. In order to prevent precipitation, intermittent stirring should be maintained during the operation.
>After finishing the first layer, you must wait for the base surface to be slightly dry (just not sticky) before applying the second layer. It usually takes - hours, depending on the density and temperature of the substrate. If it exceeds 1 hour or the coating has solidified, it must be fully moistened with clean water first. After finishing one layer, you must wait for it to dry slightly before applying the second layer.
>. From the second day after slurry application, it is recommended to cover the coating with fine spray water or wet cloth. For example, if a pool has been filled with water for a long time, it should be left empty for two weeks before filling it with hot water or a corrosive liquid pool. Vacant for three weeks.
>Notes
>. The construction temperature of this product is ℃ ~ ℃. During construction, it should be ensured that this product completely covers the base surface waterproof layer and is completely dry before other operations can be performed.
>Protective measures must be taken within hours after the construction is completed to prevent people from walking, being exposed to rain, frost, and scorching sun exposure.
>After the paint is mixed, it should be used up within minutes.
>Packaging

kg/barrel,
kg/barrel, kg/barrel, kg/barrel
Storage and transportation
>Store in a cool, dry place The shelf life of unopened products is one year.
- More products