Taiwan high precision reducer

产地：

台湾

型号：

TSB150L1-10-35-114.3

平均使用寿命：

20000小时

Low backlash planetary reducer, Taiwan high-precision reducer, precision planetary reducer, low backlash reducer, high-precision reducer, planetary reducer, high-precision planetary reducer, low backlash, high-precision reducer, Taiwan precision reducer. Taiwan Dinggu D planetary reducer ---. The integrated double-support strong mechanism is widely used in automated machinery and equipment such as bottle blowing machines, corrugated paper cutting machines, CNC gantry milling machines, and six-axis robot traveling mechanisms.
- -
.
Installation method of low backlash planetary reducer:

Apply a little anti-rust oil to the motor output shaft and flange.
If there is a bushing, when placing it into the input shaft of the low-backlash planetary reducer, pay attention that the grooves on the bushing must be aligned with the grooves on the input shaft of the reducer.
Place the motor to be installed on the platform with the motor output axis upward, then secure the motor and remove the key.
Carefully align the groove on the input shaft of the servo reducer with the key groove on the motor and slowly slide it in.
Lock the fixing screw on the input shaft of Taiwan's high-precision reducer with the first torque.
Tighten the fixing screws of the motor and reducer.
Increase the torque evenly and gradually (three times) to tighten the fixing screws on both sides of the input shaft of the low-backlash reducer.
Please do not hit the output shaft of the reducer with gravity to avoid damaging the internal mechanism of the Taiwan precision reducer.

Rated torque
The rated torque is the torque that the reducer can load for a long time (that is, the continuous working system).

Torque
Torque is the actual driving force for rotational motion. It is the product of the lever arm and the force. =*.

Acceleration torque ()
Refers to the maximum torque allowed to be loaded onto the output shaft for a short period of time when the working cycle is less than times per hour. For > times, r impact factor must be considered (see impact factor for details). It is a limiting parameter in the periodic work system.

Reduction ratio
Indicates that the reducer changes the three main parameter values of a certain movement, that is, the rotation speed, torque and inertia ratio are changed through the reduction ratio of the reducer. Change the relationship to the geometry of the transmission component to calculate the result (example: =)

Positioning accuracy
The key to accurate positioning in high-speed mechanical reciprocating motion is to minimize the angle caused by the motion. The deviation positioning accuracy depends on two values. One is the deflection angle related to the load, which involves r (torsional stiffness and return clearance), and the other is the motion-related r (synchronous deviation) problem.

Backlash
Backlash refers to the maximum deviation angle between the output shaft and the input end of the reducer. When measuring, first fix the input end of the reducer and then load a certain torque on the output end with a torque meter to overcome the friction in the reducer. The main factor affecting torsional backlash is the meshing surface gap between teeth.

Arc minutes () The unit of backlash
Degrees are divided into arc minutes. Arc minutes = seconds. When the backlash is marked in arc minutes, the angular deviation of the output end of the reducer is / degree when one revolution is made. In practical applications this angular deviation is related to the shaft diameter. That is to say, when the diameter of the output end is , the accuracy of the reducer is = arc minutes, and the deviation of the reducer in one revolution is =. Calculation formula: =*r*.
When selecting Taiwan's high-precision reducer, you should pay attention to:

Make sure your load rated torque is less than the rated output torque of the high-precision reducer.
The rated torque of the servo motor (multiplied by) the reduction ratio is greater than the rated torque of the load.
The moment of inertia converted from the load to the servo motor through the reducer must be within the allowable range of the servo motor.
Confirm that the accuracy of the low-backlash high-precision reducer can meet your control requirements.

Low backlash planetary reducer has high precision, high torque, high rigidity, high load, high efficiency, high speed ratio, long life, low inertia, low vibration, low noise, low temperature rise, Precise positioning, exquisite appearance, small and lightweight, can be installed at will, etc. Suitable for speed increase and deceleration transmission of AC servo motors, DC servo motors, stepper motors, hydraulic motors, ordinary motors, etc. Suitable for connection of drive products manufactured by any manufacturer in the world, such as: Panasonic, Mitsubishi, Yaskawa, Sanyo, Omron, Fuji, Delta, TECO, Siemens, Schneider, Handebo, Tamagawa, Falak, Tomita, Guangshu, Hua Shu Da, Yuhai, Xinjie, Dongling, Yingmaike, Bomed, Onok, Yingweiteng, Chaotongbu, Baishan, Leisai, Yankong, Shanshe, Shinano, Tuoda, etc.