Planetary reducer

产地：

台湾

型号：

TSB120L2-40-22-110

平均使用寿命：

20000小时

Precision Planetary Reducer Taiwan Precision Reducer Planetary Reducer Low Backlash Reducer High Precision Planetary Reducer Precision Reducer Servo Precision Reducer Taiwan Precision Planetary Reducer. Taiwan's D precision planetary reducer---the integrated double-support structure reducer's steel materials are all from Taiwan and use bearings imported from Germany to ensure that each reducer is strong, durable and highly rigid to withstand strong radial and axial forces.
-dd
Precision planetary reducer performance and features:

The transmission interface of the planetary gear reducer uses a full-needle needle roller bearing without a cage to increase the contact area and improve the structure. Rigidity and output torque.
Taiwan's precision reducer uses advanced German equipment and design analysis technology to modify the tooth shape and lead of the tooth surface to reduce the impact and noise of the gear meshing in and out and increase the service life of the gear system.
The material of the planetary reducer is made of high-grade high-quality alloy steel with a hardness of up to ().
The planetary arm and the output shaft adopt an integrated structural design, and the bearing configuration of the output shaft adopts a large-span design to ensure large torsional rigidity and output load capacity.
Use/long-term lubricating oil and adopt a protection-grade sealing design. The lubricating oil will not leak and there is no need to add lubricants and maintenance-free during the entire service period.
The connection between the input end of the servo precision planetary reducer and the motor adopts a collet-type locking mechanism and undergoes dynamic balance analysis to ensure concentricity of the interface and zero backlash power transmission under high input speeds.
The planetary gear and sun gear made of the complete set of gear materials have strong rigidity and accurate concentricity.
The unique modular design of the motor connecting plate and bushing is suitable for any servo motor and stepper motor.
The surface of the planetary reducer is treated with electroless nickel to improve environmental tolerance and corrosion resistance.
The precision planetary reducer and inner ring gear adopt an integrated design with compact structure, high precision and large output torque. Planetary reducer, precision reducer, planetary reducer: with high precision, high rigidity, high load, high efficiency, high speed ratio, long life, low inertia, low vibration, low noise, low temperature rise, beautiful appearance and light structure Small, easy to install, precise positioning and other features.
Precision planetary reducer is suitable for speed increasing and reducing transmission of AC servo motors, DC servo motors, stepper motors, hydraulic motors, ordinary motors, etc. Suitable for connection of drive products manufactured by any manufacturer in the world, such as: Panasonic, Mitsubishi, Yaskawa, Sanyo, Omron, Fuji, Delta, TECO, Siemens, Schneider, Handebo, Tamagawa, Falak, Tomita, Guangshu, Hua Shu Da, Yuhai, Xinjie, Dongling, Yingmaike, Bomed, Onok, Yingweiteng, Chaotongbu, Baishan, Leisai, Yankong, Shanshe, Shinano, Tuoda, etc. The connection between the input end and the motor adopts a collet-type locking mechanism and undergoes dynamic balance analysis to ensure concentric power transmission at the combined interface at high input speeds.
The planetary gears and sun gears made of the entire gear bar have strong rigidity and accurate concentricity.
Supply: planetary reducer, servo planetary reducer, precision planetary reducer, planetary reducer factory, planetary gear reducer, planetary reducer, servo precision planetary reducer, servo motor planetary reducer, planetary reducer, planetary reducer company, precision servo planetary reducer. Planetary reducer, planetary reducer, servo motor planetary reducer, servo planetary reducer.
Precision planetary reducers are widely used in servo, stepper, DC and other transmission systems due to their small size, high transmission efficiency, wide deceleration range, and high precision. Its function is to reduce the speed, increase the torque and reduce the load/motor inertia ratio on the premise of ensuring precision transmission. In the past few years, some users have broken the output shaft of Taiwan's precision reducer due to illegal installation and other human factors when using planetary reducers, causing the company to suffer unnecessary losses. Therefore, in order to better help users make good use of planetary reducers, we will introduce to you in detail how to correctly install planetary reducers.

The correct installation, use and maintenance of planetary reducer is an important part of ensuring the normal operation of mechanical equipment. Therefore, when installing the servo precision planetary reducer, be sure to assemble and use it in strict accordance with the following installation and use related matters.

The first step before installation is to confirm whether the motor and precision planetary reducer are intact and strictly check whether the dimensions of the parts connecting the motor and the reducer match. Here are the positioning boss, input shaft and reducer of the motor. Machine grooves and other dimensions and fit tolerances.

The second step is to unscrew the screw on the dust hole on the outside of the Taiwan precision reducer flange and adjust the system clamping ring so that the side hole is aligned with the dust hole, insert the inner hexagon and tighten. Then remove the motor shaft key.

The third step is to naturally connect the motor to the precision planetary reducer. When connecting, it must be ensured that the concentricity of the output shaft of the reducer and the input shaft of the motor is consistent and that the outer flanges of the two are parallel. Inconsistent concentricity may cause the motor shaft to break or the precision reducer gear to wear.

In addition, it is strictly forbidden to hit with a hammer during installation to prevent excessive axial or radial force from damaging the bearing or gear. Be sure to tighten the mounting bolts before tightening the force bolts. Before installation, wipe the anti-rust oil on the motor input shaft, positioning boss and reducer connection parts with gasoline or zinc-sodium water. Its purpose is to ensure the tightness of the connection and the flexibility of operation and to prevent unnecessary wear.

Before connecting the motor to the servo precision planetary reducer, the motor shaft keyway should be vertical to the tightening bolt. To ensure uniform stress, first screw on the mounting bolts at any diagonal position but do not tighten them, then screw on the other two mounting bolts at diagonal positions, and finally tighten the four mounting bolts one by one. Finally tighten the force bolt. All tightening bolts need to be fixed and inspected with a torque wrench according to the indicated fixed torque data.