Taiwan TWD planetary reducer

产地：

台湾

型号：

TSA120L2-25-22-110

平均使用寿命：

20000小时

Taiwan D Planetary Reducer Servo Reducer Servo Planetary Reducer Servo Motor Reducer Planetary Reducer Taiwan Reducer Planetary Gear Reducer --- Adaptation ~. The average service life of the servo motor integrated double support structure is hours double-stage standard Backlash Arc Divider Double-stage precision backlash arc divider is widely used in automated machinery and equipment such as packaging machinery, plastic machinery, food machinery, pipe bending machinery, and packaging machinery.
- -
.
Planetary reducer lubrication:
The planetary reducer is a sealed design and does not require oil change.
The oil is a semi-solid high-grade synthetic oil
Ambient operating temperature: ~+℃
The maximum allowable temperature of the planetary reducer body is below ℃
Note: The working temperature must be below ℃ before ordering. Please indicate clearly

Quality guarantee for purchasing servo planetary reducer:
Under normal use, the servo planetary reducer is guaranteed for one year from the date of delivery.
It has a two-year oil leakage warranty under normal use.
Note: Man-made or natural disasters are not covered by the warranty.

Planetary reducer installation instructions:
The order of installation of planetary reducer and servo motor:
Install the servo motor output shaft into the planetary reducer input shaft
Tighten the screws (the connection between the servo and the reducer)
Tighten the screwdrivers on the left and right sides evenly
Tighten the torque wrenches on both sides
Insert the protective cover into the reducer In the screw hole

Installation method of servo planetary reducer:

Apply a little anti-rust oil to the motor output shaft and flange.
If there is a bushing, when placing it into the input shaft of the planetary reducer, pay attention that the groove on the bushing must be aligned with the groove on the input shaft of the servo planetary reducer.
Place the motor to be installed on the platform with the motor output axis upward, then secure the motor and remove the key.
Carefully align the groove on the input shaft of the servo reducer with the key groove on the motor and slowly slide it in.
Lock the fixing screw on the input shaft of the planetary reducer with the first torque.
Tighten the fixing screws of the motor and servo reducer.
Increase the torque evenly and gradually (three times) to tighten the fixing screws on both sides of the input shaft of the planetary gear reducer.
Please do not hit the output shaft of the reducer with gravity to avoid damaging the internal mechanism of the reducer.