Weekend summary of roller crusher equipment startup problems

Over the weekend, we summarized the start-up problems of roller crusher equipment. Our common double-roller crusher did not remove the ore in the crushing cavity cleanly when it was stopped last time. This resulted in the machine being damaged due to the residual ore in the cavity when the machine was started for the first time. The roller crusher is subjected to a large load, making it difficult to start the machine. The viscosity of the grease of Veken Heavy Industry's roller crusher is relatively large, and the main force of bearing rotation increases during startup, making it difficult to start the machine. Veken Heavy Industry's roller crusher produces a large amount of dust when it is working. Some of the dust enters the bearings and is mixed with the lubricating oil, causing the lubricating oil to deteriorate and causing its lubricity to decrease, which aggravates the bearing's problems. The wear and tear between them increases the resistance, making it difficult to start the machine. There is a problem with the wiring of the roller crusher equipment, which makes it difficult to start the machine. Why does this happen? It will be solved over the weekend.
What does Veken Heavy Industry do? After the customer has finished working on the roller crusher, let the machine run idling for a period of time to discharge the materials in the crushing cavity cleanly. The user should strengthen the inspection of the machine and select the appropriate grease to lubricate the roller crusher. Do a good job in dust removal of the roller crusher. Check the lines and keep them clear. Welcome to visit our factory and visit the official website of Veken Heavy Industry!
Vertical shaft impact crusher:
Hammer crusher:
Slag mill:_