Year1
- 电机功率：
- 7.5-37
- 减速速比：
- 43
- 生产能力：
- 10T/h-80T/h
/#/#/#/# 1. Operation essentials
/#/#/#/# The amount of digested water has been mentioned before Varies due to changes in different parameters. In order to obtain a good regulating effect, the lime remaining in the environmentally friendly quicklime digester must be checked from time to time, especially during the first hour of operation. Pay attention to check whether there is too much or not enough water.
/#/#/#/# When the water supply is insufficient, the materials in the environmentally friendly quicklime digester tend to partially agglomerate, but other parts still flow as usual. In this case, the blades of the paddle wheel are very clean and the material flows smoothly. When too much water is supplied, there is also a tendency to agglomerate, but the phenomenon is different from the former. In this case the lime no longer flows smoothly but has a tendency to stick to the paddles. When the water supply is appropriate, the lime powder at the end of the environmentally friendly quicklime digester will not agglomerate, has medium fluidity, and will not stick to the paddles.
/#/#/#/# Once the water supply is adjusted, the humidity of the material has almost no change. This is very important to quickly find out if the water level is adequate. When the water supply is too much or too little, the materials in the environmentally friendly quicklime digester will agglomerate, which will increase the power consumption of the paddle wheel. Therefore, the degree of agglomeration of the material can be used to reflect whether the material is too wet or too dry, usually it is too wet. It is recommended to compare the visual appearance of the material with the humidity value measured in the test chamber so that the operator can determine through observation whether the amount of water is appropriate.
/#/#/#/# 2. Test process
/#/#/#/#, turn on the digestive system
/#/#/#/#, wait for hours until the environmental protection The temperature and humidity in the quicklime digester are stable and within the normal operating range
/#/#/#/#, start recording and start sampling
/#/#/#/#, each half Record the following data every hour:
/#/#/#/# Quick lime feeding amount
/#/#/#/# Environmentally friendly quick lime digester water spray amount
/#/#/ #/# The temperature of the environmentally friendly quicklime digester
/#/#/#/# The speed and current of the stirring shaft.
/#/#/#/#. Sampling the final slaked lime every hour. The sample size is about 20%. The sample must be placed immediately into a sealed plastic tank with a lid.
/#/#/#/# , Check the environmentally friendly quicklime digester nozzle from time to time.
/#/#/#/# 3. Preparation before starting and stopping the system
/#/#/#/# Before starting, check whether the sensor of the weighing system is dusty or whether the weighing frame is stuck. Check the water system for blockage, debris, etc.
/#/#/#/#. Before shutting down, shut down the feeding system and delay the shutdown for 10 minutes to ensure that the lime powder in the environmentally friendly quicklime digester is emptied.
/#/#/#/# 4. Interlocking instructions
/#/#/#/# . Emergency stop button Do not use the emergency stop button on the on-site control cabinet lightly. When the emergency stop button is activated, the environmentally friendly quicklime digester immediately stops all equipment. Due to the large amount of lime in the environmentally friendly quicklime digester, the motor may fail to start and requires manual cleaning.
/#/#/#/#, Interlocking of environmentally friendly quicklime digester and external equipment
/#/#/#/# First open the associated equipment at the outlet of the environmentally friendly quicklime digester before starting The environmentally friendly quicklime digester starts the water supply system feeding system in turn. The shutdown sequence is to first shut down the feeding system, water supply system, and delay the shutdown of the environmentally friendly quicklime digester.
/#/#/#/# 5. Special attention
/#/#/#/# If there is a power outage or other failure and there is a large amount of material stored inside the machine, it must not be forced to start and must be cleaned. It can be started lightly from the rear.
/#/#/#/# If there is a malfunction or internal cleaning materials must be turned off before any live treatment is allowed.
/#/#/#/# It is prohibited to carry out any repair work when the environmentally friendly quicklime digester is in operation. When other objects must be taken out of the machine, the machine must be stopped first and then taken out.
/#/#/#/# Environmentally friendly quicklime digesters are not allowed to operate with loose lids.
/#/#/#/# , Unauthorized personnel are prohibited from entering the production site.
/#/#/#/# 6. Safety instructions for environmentally friendly quicklime digester
/#/#/#/# , scalds and burns
/#/#/#/# Due to When quicklime reacts with water, the reaction temperature can reach ℃. Contact with the environmentally friendly quicklime digester shell and outlet materials should be avoided to avoid scalding or burns. It is strictly prohibited to open the manhole door or observation hole while the equipment is running.
/#/#/#/# Danger zone: Environmentally friendly quicklime digester shell surface, manhole door handle, exhaust hood, slaked lime conveying equipment.
/#/#/#/# Preventive measures: Observation and maintenance work can only be carried out after the equipment is shut down and cooled down. In addition, if
/#/#/#/# you perform observation work in the above dangerous areas when the equipment is running, you must wear safety gloves and safety shoes.
/#/#/#/# , falls, crushing, bumps and smashes
/#/#/#/# Moving movable power parts may cause injury to personnel. Adding lubricating oil and lubricant must be done when the equipment is shut down and ensure that all power equipment has been powered off. Do not put your hands on moving equipment and screw conveyor conveyors.
/#/#/#/# Danger zone: screw conveyor, environmentally friendly quicklime digester rotating shaft.
/#/#/#/# Preventive measures: Lock the housing of the driving part and seal the protective cover of the movable part in the middle.
/#/#/#/#, tripping over the protruding or protruding parts of the equipment
/#/#/#/# Do not jump on the screw conveyor or other equipment and try to avoid crossing over. equipment and take appropriate precautions against equipment that may fall.
/#/#/#/# Dangerous areas: broken platforms and approach tunnels, the bottom of the screw conveyor, the lower part of the environment-friendly quicklime digester platform and the equipment slope.
/#/#/#/# Precautions: Do not lean over railings or handrails. During equipment maintenance, you should use small escalators or other tools to climb to high areas of the equipment. During the operation of the equipment, a helmet should be worn when inspecting in the above dangerous areas.
- <=_
Company name: Hebei Xinda Dust Removal Equipment Co., Ltd.
Contact person: Ms. Zhao
Telephone:
Mobile:
Fax:< br/> :
Email:@.
Address: Fuzhuang Development Zone, Nanpi County, Cangzhou City, Hebei Province
WhatsApp
