Year1
- 型号：
- PL-800B
- 除尘率：
- 99.9（%）
1. Single-machine bag dust collectors without ash hopper drawers
Product Introduction Series single-machine dust removal equipment is imported from abroad A novel product successfully developed by improving dust removal equipment, it is an on-site dust removal unit with small size and high dust removal efficiency.
2. Structural Overview
Stand-alone bag dust collector without ash hopper drawer
The basic structure of the unit consists of three parts: fan, filter and dust collector. Each component is installed in a Inside the vertical frame, the steel plate shell has beautiful appearance, scientific structure, reliable operation and easy use.
The structural characteristics of each component of the stand-alone bag dust collector without ash hopper drawer are as follows
The machine components are imitated foreign centrifugal fans, with large air volume, high air pressure, hard fan characteristic curve, and noise reduction measures. , low noise when in use.
The filter component of the stand-alone bag dust collector with ash hopper drawer
The filter component is a flat bag filter made of industrial polyester cloth as the filter material. The bag is equipped with a spring steel mesh, which has good filtration effect and is easy to replace the filter bag. long lasting.
The dust cleaning mechanism of the filter component uses a motor to drive the eccentric wheel, and the connecting rod shakes the bag to remove dust stuck to the outer surface of the filter bag. The control device is divided into two types: automatic control and manual control. Automatic control means that when the fan is working continuously, the dust cleaning mechanism will automatically vibrate and clean the dust at regular intervals. Manual control means that the dust cleaning mechanism will automatically work after the fan stops and will automatically stop after dozens of seconds. You can also start the dust cleaning motor to vibrate and clean at any time as needed. The user can adjust the time relay for dust cleaning time.
The filter component is equipped with a wide and sealed quick-detachable access door② to facilitate inspection and removal of the filter when necessary.
The air inlet interface ③ on the upper side of the dust collector can be folded down when needed to increase the use of the air inlet area.
Single-machine bag dust collector with ash hopper drawer
There are sixteen specifications, divided into two types. The model is equipped with a ash hopper drawer, and the model is not equipped with a ash hopper drawer. The lower flange is directly connected by the user to the dumping port of the folding bin, the mixing bin, sandblasting box, belt transport U-turn and other dust-raising equipment for on-site dust removal, and the dust is directly recovered.
3. Stand-alone bag dust collector without ash hopper drawer
Working principle
Dust-containing gas enters the box and is filtered by the flat cloth bag filter, and the dust is blocked on the outer surface of the filter bag , the purified gas enters the fan through the filter bag, and is sucked in by the fan and discharged directly into the room (it can also be discharged to the outside via a pipe).
As the filtration time increases, the dust attached to the outer surface of the filter bag also increases, and the resistance of the filter bag also increases accordingly, thus affecting the dust removal effect. An automatic dust cleaning mechanism is used for regular vibration cleaning or manual cleaning. After the dust mechanism stops, it will automatically vibrate for tens of seconds to shake off the dust stuck to the outer surface of the filter bag. The dust falling into the dust collection container (drawer) is manually pulled out and removed.
4. Single machine bag type dust collector without ash hopper drawer
Uses
Single machine bag type dust collector without ash hopper drawer
Widely used in foundry industry, ceramic industry, glass industry Industrial and dust removal in refractory materials, cement building materials, sand fiber manufacturing, chemical products, mechanical processing and other industries. Single-machine bag dust collector without ash hopper drawer is suitable for metal chips with large specific gravity, foundry sand, such as lathes, grinders, milling machines, grinders, polishers, etc., and dust with medium specific gravity, such as cement, ceramic powder, and gypsum powder. , toner, pigments, bakelite powder, plastic powder, etc., as well as non-fibrous dust with a lighter specific gravity, all have good dust removal effects. The dust removal efficiency of this unit is greater than 99.5%.
The injection pressure, that is, the machine vacuum, refers to the pressure available for the machine, which is the absolute value of the measured static pressure at the air inlet of the machine
The injection efficiency is greater than the talcum powder used for the determination of the median diameter. Value, the lowest measured value is, the average value isbr/> The air volume of the device is the suction volume at the operating pressure
5. Instructions for use of series single machine bag dust collector
Single machine bag dust collector with ash hopper drawer
When installed near mechanical equipment that generates dust, the user can prepare metal or plastic vacuum ducts and dust hoods according to the size of the air inlet on the dust removal group (you can also contact the manufacturer when ordering) can be prepared on your behalf).
Before starting work, check whether the access door, dust outlet door and air duct connection system are sealed to avoid leakage and reduce the dust collection effect.
The voltage of the single-machine bag dust collector with ash hopper drawer is three-phase AC 380 volts. It can be used after connecting the power supply to the external wire on the unit. During initial operation, attention should be paid to the fan Whether it is running forward (if it is running reversely, the air volume will be very small, and the power wiring needs to be changed).
The electric control box cover should not be opened at will during work. If you need to adjust the cleaning time or check the circuit, you should stop the machine or cut off the power before starting work.
According to the nature of the dust and the size of the dust-holding capacity, the dust should be regularly vibrated and cleaned. Generally, the vibrating should be done three to four times per shift, and it is appropriate to vibrate for seconds each time to ensure the normal operation of the unit.
According to actual needs, clean dust regularly. When cleaning the dust in the dust collector, you only need to open the sealed dust outlet door and pull out the drawer when the fan and dust cleaning mechanism stop working.
In order to ensure that the equipment is in the best working condition, it should be as close as possible to the source of dust. Generally, the connecting pipe should be one and a half to two meters long, which may be shorter, and elbows should be minimized to avoid increasing resistance loss.
The dust cover is a key accessory to ensure that the unit is in optimal condition. The user should design and manufacture the dust cover based on the dimensions of the workpiece and the nature of the dust, and in accordance with the principles of accessibility, proximity, smoothness, sealing and convenience. Ideal vacuum hood.
When purchasing air box pulse dust collectors, Hebei Xinda Dust Removal Equipment Co., Ltd. is your first choice. We will use the best quality products and the most affordable prices to look forward to your visit!
We supply single-machine bag dust collectors without ash hopper drawers with high quality and low price. Welcome to call
WhatsApp
