CW62100 Lathe Professional Manufacturer 62100 Heavy Duty Lathe Market Hot Selling

Professional manufacturer of lathes, nozzle-baffle type lathe for heavy-duty lathes. Professional manufacturer of hydraulic servo system for heavy-duty lathes. The working principle of this servo system consists of nozzles, baffles, tube sheets and hydraulic cylinders. There is a fixed orifice and an intermediate oil chamber in the nozzle. Part of the pressure oil from the hydraulic pump directly enters the rod chamber of the hydraulic cylinder, and the other part enters the intermediate oil chamber through the fixed orifice to reduce the pressure and then flows into the hydraulic cylinder. No rod cavity. Professional lathe manufacturer Heavy lathe The direction of hydraulic cylinder movement in the servo system depends on the direction of the input signal, and the speed of movement depends on the size of the input signal. The advantages of the jet tube servo system are: simple structure, low component processing accuracy requirements, large jet tube exit area, strong anti-pollution ability, able to work under harsh working conditions, no unbalanced radial force on the jet tube, and no jamming phenomenon. . Its disadvantages are: the inertia of the moving part of the jet tube is large, the working performance is poor, the jet energy loss is large, the reactive power loss at the zero position is also large, the efficiency is low, it is easy to cause vibration when the oil supply pressure is high, and there is a large axis along the axial direction of the jet tube. Xiang Li. Therefore, this kind of servo system is only suitable for low-voltage and low-power situations, such as the servo systems of some hydraulic profiling machine tools. Guide rail parameters:
<= d%> %> Specifications and models
%> >
%> >Lathe lathe
%> Maximum rotation diameter of heavy-duty lathe bed by a professional manufacturer of lathes< br/> %> >
%> >
%> Maximum rotation diameter on tool holder
%> >
%> >
%> Maximum workpiece length
/> %> >
%> >
%> Rotation diameter/effective width in saddle groove
%> >
%> >/
%> Spindle through hole Diameter and shaft head type
%> >
%> >(Series)(Series)
%> Spindle through hole front end taper and tip taper
%> >
%> >(Series) (Series) Mohs number
%> Spindle speed series and range
%> >r /
%> >Types
%> Longitudinal advance Given series and range
%> >/
%> >Type
%> Range:
%> >/
%> >
% > Range:
%> >/
%> >
%> Micro feed range with exchange gear
%> >/
%> >
%> Ratio of transverse feed amount and longitudinal feed amount
%> >
%> >/