Oven_Kangting oven_Kangting gas oven

[Wang Huisi’s address is Room Kangting, Jiurun Business Building, Husong Road, Jiuting Town, Songjiang District, Shanghai. During the operation of the Kangting gas oven, operators must take appropriate protective measures when handling pastry items to avoid burns or scalds. Each floor of the oven is equipped with a temperature limiter. When the over-temperature limit is reached, the power supply to the heating tube in the oven will be cut off in time to prevent excessive temperature from burning out the equipment. At this time, the main output terminal of the temperature limiter is in a long-term disconnection state, and the oven stops heating. A power-off pass process must be performed before the main output terminal can be connected and the oven can work normally. The workplace should be well ventilated and dry. The oven should not be exposed to direct sunlight or placed in a place with moisture or corrosive substances and gases. No flammable items should be piled around the oven. The Kangting gas oven should be placed at least 30 meters away from the back wall to ensure that the vent hole is unobstructed. The ambient temperature must be ~ ℃ and the relative humidity should not be more than ℃. // During the transportation of Hongling Electric Heated Tube Oven and Kangting Gas Oven, the oven should be handled with care to prevent severe vibration and must not be turned upside down. The packaged oven should not be stored in the open for a long time, but should be placed in a warehouse with a relative temperature not exceeding 50%, good ventilation, and no corrosive gases. When temporary open-air storage is required, rainproof and corresponding protective measures should be taken. Instructions for using the oven: First, connect the oven power cord to the air switch or leakage switch of the power supply, and then turn the temperature controller knobs that control the surface fire and primer to the required set temperatures. Press the power switches for the lower flame and primer respectively. At this time, the green indicator light on the temperature controller will light up, indicating that the oven has started to work. When the surface fire or bottom fire reaches the set temperature, the red indicator light turns on, the green indicator light goes out, and the oven enters the automatic constant temperature state. Press the stop button to stop the oven. Kangting gas oven can arbitrarily adjust the temperature of the surface fire and bottom fire according to the requirements of the food being baked, or use the surface fire and bottom fire separately to achieve the ideal color of the food. Printed on the instrument panel, it means power is off, it means power is on, it means it is off, it means it is on.