Year1
- 处理风量：
- 12330-17000m3/h
- 过滤风速：
- 1.0-2.5m/min
- 过滤面积：
- 112㎡
Xianxian Yongsheng Environmental Protection Equipment Co., Ltd.
Dust removal equipment
The dust collector filter unit is equipped with a wide and sealed quick-detachable access door to facilitate inspection and removal of the filter when necessary.
.The components of the stand-alone bag dust removal equipment adopt a bucket-type structure, which is very convenient for dust removal.
.The air inlet interface on the upper side of the dust collector can be folded down when needed to increase the use of the air inlet area.
.The unit currently has sixteen specifications, divided into two types. The model is equipped with a ash hopper drawer, and the model is not equipped with a ash hopper drawer. The lower flange is directly connected by the user to the dumping port of the folding bin, the mixing bin, sandblasting box, belt transport U-turn and other dust-raising equipment for on-site dust removal, and the dust is directly recovered.
.This unit can be specifically manufactured according to the actual needs of the design unit or user
.The fan components are imitated from foreign centrifugal fans, with large air volume, high air pressure, hard fan characteristic curve, and noise reduction measures. It makes little noise when in use.
.The filter component is a flat cloth bag dust collector using industrial polyester twill velvet as the filter material. Each bag is equipped with a spring steel mesh, which has good filtration effect, easy replacement of filter bags and long service life.
.The dust cleaning mechanism of the single-machine bag dust removal equipment component uses a motor to drive the eccentric wheel, and the connecting rod shakes the bag to remove dust stuck to the outer surface of the filter bag. The control devices of bag dust collectors are divided into two types: automatic control and manual control. Automatic control means that when the fan is working continuously, the dust cleaning mechanism will automatically vibrate and clean the dust at regular intervals. Manual control means that the dust cleaning mechanism will automatically work after the fan stops and will automatically stop after dozens of seconds. You can also start the dust cleaning motor to vibrate and clean at any time as needed. The user can adjust the time relay for dust cleaning time.
WhatsApp
