One-component moisture-curing polyurethane foam technology, leading serialized white latex technology

White latex series technology (anti-freeze, moisture-proof, environmentally friendly, high, medium and low-end series technology)
A revolution in latex [white latex expert] low cost, high quality
Produced by Beijing Huaxia Keyuan Technology Development Center
Research
The technology has completely changed the traditional practice of using vinyl acetate monomer and starch as the main raw materials to produce white latex. Different formulas share a set of equipment. According to different uses, it can produce RMB/ton, There are four grades of products: RMB/ton, RMB/, and RMB/ton. It only takes an hour to produce the product, with dry strength ~ wet strength.~ (national standard dry strength and wet strength)?
1. Project Overview?
The products are divided into high-grade glue, mid-grade glue, ordinary glue and low-grade glue. A set of equipment can be shared to produce a variety of products. Enterprises can flexibly control production plans according to local market needs, with low input and high output, reducing product costs and improving comprehensive benefits. Using this technology to produce products has simple equipment, short production cycle and reliable quality. ?
2. Technical characteristics of the product?
The new strong white latex produced with a new formula and new process is formulated with high-performance polymer materials and several other easily purchased chemical raw materials, completely changing the It has the main raw materials and production process of traditional white latex, and the raw materials are easy to purchase, and the production process is simple. The product appearance is a milky white viscous liquid, with excellent low temperature resistance, no precipitation, no layering, no gelling, and good water resistance. It has high bonding strength, is soft and elastic, has good initial tack, does not draw strings, dries quickly and is easy to use. And it uses water as the medium, does not contain organic solvents, is non-toxic, non-flammable, has no irritating odor, and is pollution-free in production. When the product is put on the market, it will quickly replace traditional white latex with its low cost and high quality. It is widely used in wood, paper, fabric, leather, chemical building materials, decoration and other industries, and the market prospect is extremely broad. ?
3. Production conditions and profit analysis?
, Two people produce, the equipment investment is ~ yuan (self-made reactor), the factory can produce kilograms per person, the equipment investment is .10,000 yuan, the factory can produce daily Ton. ?
The cost of high-grade white latex is RMB/ton, the sales price is about RMB/ton, the cost of mid-range rubber is RMB/ton, the sales price is RMB/ton of ordinary rubber, the cost is RMB/ton, the sales price of low-grade white latex is RMB/ton. / ton, sales price yuan / ton, the above price is for reference only, the sales price can also be flexibly determined according to local market conditions. If calculated based on the production of small and medium-sized enterprises, each of the four types of rubber can produce ~kg per day, and the selling price minus the cost, the profit will be about 100 yuan. If the foundation is established and the market is opened and the production scale is expanded, the profit will be even more considerable. ?
If you are currently producing white latex products and have certain customers, without increasing fixed assets and only paying a negligible technical service fee, you can increase the original single product into a series. I think that with our scientific research experts and your existing basic conditions, your production and sales will skyrocket, and your opponents will also give up their market share due to single products, high costs, and lack of information. ?
If you are interested in investing but have never been exposed to white latex products, I don’t think you need to worry. As long as you are confident and there is a local market, you can do it with confidence. Our scientific research experts will be strong for you. technical support and solve all the difficulties you encounter. ?
+ Polyvinyl acetate white latex production technology
1. Performance
Polyvinyl acetate white latex is produced using the latest technology and formula. The solid content can be adjusted arbitrarily from %%. This product has strong adhesion Strong, good stability, quick-drying, non-toxic, odorless, the film is transparent, shiny and tough, water-resistant and low-temperature resistant. It is a popular general-purpose adhesive in the market, an economical and environmentally friendly water-based adhesive agent. Now it is mass produced and sold by well-known domestic enterprises such as Beijing Organic Chemical Factory, Shanxi Sanwei Chemical Factory, Sichuan Vinylon Factory, and Guizhou Crystal Chemical Factory.
2. Use
Generally used in furniture manufacturing, plywood, fiberboard, particleboard production, printing industry lamination, carton welting, construction industry painting, wood processing, paper processing, textile sizing, handicrafts Production and many other uses.
3. Main equipment
Boilers, reactors, high-level lagoons, etc.
4. Main raw materials
Vinyl acetate, polyvinyl alcohol, initiators, plasticizers, etc.
New technology of environmentally friendly strong white latex
The products produced using this technology are absolutely free of formaldehyde, benzene and polyvinyl acetate monomer, the production cycle is short, the cost is adjustable, the appearance and use method are the same as traditional white latex, storage The term is more than 1 year, the production equipment is an ordinary reactor, and the equipment investment is 10,000 yuan per ton per year. The product has been tested by the Chinese Academy of Preventive Medicine Sciences and fully complies with the mandatory mark issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China.
Technical service method
. Complete set of white latex series technology, transfer and training fee totaling . .On-site training is provided until you learn it, and post-service is provided. You can also come to build a factory, and the fee is negotiable
. Can provide relevant test reports for delivery units
. Can be authorized to use our company's Huaxia Light registration for free trademark.
Pay attention to learning a complete set of white latex technology, and you can set up a comprehensive white latex factory to meet the needs of various high, medium and low-end markets. Based on the principle of one selling to many factories and multiple factories using one, there will be no dead ends in sales and docking. Seamless, improve competitiveness and sales share, and maximize benefits.
Technical consultation phone number

One-component moisture-curing polyurethane foam technology
1. Product Overview
Beijing Huaxia Keyuan Technology Development Center
Adhesive Expert The one-component moisture-curing polyurethane foam product developed by the team is non-toxic, odorless, and widely used after molding. It has high bonding strength, excellent toughness resistance, water resistance, and moisture and heat aging resistance. It can be cured at room temperature or heated, and has excellent heat resistance after curing.
2. Scope of application
This product is mainly used for bonding composite materials such as rubber, plastic, wood, glass, ceramics, metals, etc., and is widely used in construction, shipbuilding, petroleum, and chemical industries.
This product is constructed at room temperature, cured at room temperature, and has excellent waterproof and corrosion resistance.
3. Product type
One-component environmentally friendly polyurethane adhesive
4. Physical and chemical properties
Appearance brown or light yellow viscous liquid
Viscosity □(℃)
Peel strength/(color steel plate and polystyrene foam) foam destruction
Solid content %%
Density/ ℃.
5. Usage
Clean the surface of the substrate Oil stains, apply glue evenly on the material.
Lay the rubberized surface together, or spray water on the rubberized surface before laminating, which can shorten the curing time. The paste can be slightly pressurized to achieve higher strength. It can be cured in an hour under the conditions of % humidity or water spraying, and can be used in an hour at room temperature.
6. Storage method

The storage period is one month.
7. Precautions

Avoid contact of this product with skin. Keep the work area well ventilated.
8. Production conditions
. The investment in equipment to produce this product is about RMB 10,000 per ton of mixing and filling. You can also purchase an old reactor for about RMB 10,000.
.No need to heat or pressurize during the production process, just stir at room temperature.
.Provide procurement information of raw material manufacturers and equipment to the delivery party.
.The raw materials and equipment for producing this product are easily available. We can train technicians for delivery parties and also build factories on site.
9. Technology transfer methods
The full set of technology transfer training fee is 10,000 yuan.
+ Technical consultation phone number