Supply of single machine bag dust collector, crusher and dust collector equipment for crushing workshop of mineral processing plant

处理风量：

6800m3/h

过滤风速：

0.5-1.0m/min

过滤面积：

92.9㎡

Welcome
Xianxian Yongsheng Environmental Protection Equipment Co., Ltd.
Dust removal equipment
This dust collector adopts a circular body structure with uniform force, good anti-explosion performance and compact structure. It uses a high-pressure fan to blow back and clean the dust. It is not restricted by the air source conditions. It uses resistance to automatically control the blowback and cleaning to save energy and extend the use of the bag. In severe cold It can be installed indoors in one area and outdoors in other areas. It can be widely used in many sectors such as machinery, foundry, mining, smelting, building materials, food and chemical industry, etc.
Users should pay attention to the type of dust that has high temperature, large concentration and fine particles. On the contrary, it is appropriate to use a type. If the concentration is greater than g/m, a first-level cyclone dust collector should be added in front. (For coarse core dust, it can be relaxed at discretion).
Detailed introduction of bag dust collector in the crushing workshop of the mineral processing plant
During the crushing process in the ore crushing workshop of the mineral processing plant, a certain amount of dust will be raised due to crushing, screening, belt transfer, material falling, etc. And since ores generally contain a large proportion of silica, commonly known as silicon, their dust must also contain silicon. After such dust is inhaled into people's lungs, it is difficult to expel it. Over time, people will suffer from the very serious occupational disease silicosis. Therefore, the country has long included silicosis as one of the occupational diseases to be controlled. Now, with the progress of society and the development of science and technology, people's lives and health are becoming more and more important. The problem of dust removal at sites such as mineral processing plants has once again attracted the attention of the country and enterprises. Dust removal in mineral processing plants belongs to the category of industrial hygiene, which is different from environmental protection concerns. Industrial hygiene focuses on the environmental quality of the workplace, aiming to ensure the health of employees and at the same time ensure that the dust discharged to the outside meets environmental protection requirements. Environmental protection emphasizes the concentration of dust emitted to the outside and focuses on the environmental quality of the outdoor environment. As for the small indoor environment, it pays less attention to it. To reduce dust in the crushing system of the mineral processing plant, we must first start with dust prevention, and use dust removal as a remedial measure for dust prevention, and it is a very important remedial measure. This is similar to disease prevention and treatment in people's daily life. In view of the above situation, our company has developed the following dust removal equipment for reference.