Year1
- 处理风量：
- 1000-1500
- 除尘效率：
- 99.9%
Ⅱ
Detailed introduction of type II multi-tube cyclone dust collector
, product introduction
The mechanical rotary reverse blowing flat bag dust collector adopts a circular body structure to bear even force and has good anti-explosion performance. The structure is compact and uses a high-pressure fan to blow back and clean the dust. It is not limited by air source conditions. It uses resistance to automatically control the dust and blow back to save energy and extend the service life of the bag. It can be widely used in many sectors such as machinery, mining, smelting, building materials, food and chemical industry.
Users should pay attention to the type that should be used for dust with high temperature, large concentration and fine particles. On the contrary, it is appropriate to use a type. If the concentration is greater than 1/2, a first-level cyclone dust collector should be added in front.
, Working Principle
Compared with the pulse bag dust collector commonly used in China, the mechanical rotary back-blowing flat bag dust collector has the following characteristics: The casing is designed according to the flow pattern of the cyclone dust collector, which can act as a local cyclone for large particles of dust to pass through the cyclone. The centrifugal action first separates small particles of dust and removes them from the filter bag. Due to the secondary dust removal, the load of the filter bag is reduced and the service life of the filter bag is increased. The shape of the cylindrical vault has uniform stress and good explosion resistance.
The equipment's own high-pressure fan is used to back-blow and clean dust, which is not limited by the air source conditions of the use site. Few wearing parts, easy maintenance and reliable operation. Overcome the shortcomings of compressed air pulse cleaning. The back-blowing air has a large action distance, and long filter bags can be used to fully utilize the space, occupy a small area, and process a large amount of flue gas.
The trapezoidal flat bag is arranged in the cylinder body. It has a simple and compact structure and a high filtration area index. Under the action of back blowing air, the trapezoidal flat bag has a large amplitude and can shake off the accumulated dust with just one vibration. It is beneficial to improve the life of the filter bag.
Since the rotating arm is used to back-blow and clean each bag in an annular arrangement in turns, the regeneration working condition does not affect the overall purification effect of the dust collector. Back-blow cleaning has a negative impact on the overall resistance of the dust collector. Basically no impact.
Except for severe cold areas, this dust collector can be placed in the open air without building a dust removal room.
Inquiry number
WhatsApp
