Year1
- 处理风量：
- 1000-1500
- 除尘效率：
- 99.9%
Detailed introduction of cyclone dust collector: The cyclone dust collector is composed of three parts: cyclone, ash hopper and volute (or wind cap). According to the simplified number, there are five combinations such as single tube, double tube, three tube, four tube, and six tube. Each combination has two air outlet types: horizontal air outlet and upper air outlet. For double-tube combinations, there are two combinations: center air inlet and outlet and side air inlet and outlet. Type single tube and three-tube combinations only have side air inlet and outlet. Four-tube and six-tube combinations only have center air inlet and outlet. For various combinations of Type 2, any air inlet position among the above types can be used. This type of dust removal equipment has the characteristics of small resistance, high dust removal efficiency, large air volume, stable performance, small footprint, simple structure, practicality and low cost, etc. Advantages: It is suitable for coarse and medium-level purification of dust in various mechanical processing, metallurgical building materials, and mining.
, Technical Description
After the dust collector is manufactured, the inside and outside should be painted with red lead anti-rust paint, and the outer surface should be painted with gray lead oil for anti-corrosion. When the engineering design has special requirements, anti-corrosion should be done according to the design requirements. deal with.
When assembling the dust collector, flange gaskets should be selected according to different working gas temperatures. It is recommended to use asbestos gaskets when the temperature is ℃, and rubber gaskets can also be used when the temperature is ℃.
The dust collector is required to be airtight and airtight. After assembly, a gas test of no less than millimeters of water column (gauge pressure) should be performed.
Inquiry phone number
Ms.
WhatsApp
