Year1
- 型号：
- TN6232
- 规格：
- 250g/瓶
- 包装：
- 12瓶/箱
Product description:
Tiannuo is mainly used for mutual adhesion and self-adhesion between plastics, providing customers with glues with various viscosity and transparency requirements, suitable for Various application environment requirements such as car lights, toys, handicraft assembly, pipes, and electronic component bonding. Typical adhered plastic materials include:,,B,,,, etc.
<
Traceless hook glue-
1. Performance characteristics
. Fast fixing speed, high bonding strength can be achieved in seconds.
. High adhesion and bonding strength can maintain long-term bonding.
. Has good flexibility and high elongation.
. Excellent aging resistance, no yellowing or whitening for a long time.
. Good moisture resistance and long-term waterproofing.
. Comply with R and halogen-free environmental protection specifications.
2. Technical parameters
Product model
Adhesive material B
Appearance colorless and transparent
Viscosity.℃～
Curing energy/
Sticky Bonding strength
Hardness r&;
Elongation%
Temperature range ℃-~+
3. How to use
. Clean the surface of the adhered material if there is any If the cleaning agent remains on the surface of the material, please blow it dry or wipe it dry and wait until it is completely dry before applying glue.
. Apply glue evenly on one side of the plastic surface. Place the other side of the plastic gently on the glue-coated area and press it hard to expel the bubbles and distribute the glue evenly. Make sure that the bonding parts are covered with glue ( The ideal glue layer thickness is .~.) and then fix the position.
. Use a cloth or paper towel to wipe off the excess glue that has spilled around the plastic (do not use water, alcohol and other solvents to scrub). Do not let the glue come into contact with UV light before this step.
. Use a UV lamp with a main emission wavelength of 0.01 to irradiate until the glue layer is fully cured (the irradiation time depends on the type, power, irradiation distance of the UV lamp and the UV transmittance of the plastic, etc.).
. If there is still glue overflow around the plastic after UV curing, you can use a blade to scrape it off.
WhatsApp
