High solids epoxy floor mid-coat

>High solid epoxy floor mid-coat
Product: < b >
Ratio: component/component B/(weight ratio)
Capacity: component, component B< br/> A two-component room-temperature curing high-solid epoxy mid-coat, which is prepared by adding a suitable amount of pigments and fillers to a high-solid epoxy primer resin as the matrix, and is used for coating cement substrates. After curing, it forms a strong and hard coating with good adhesion to the primer and topcoat, and enhances the overall wear and impact resistance of the concrete floor. This coating is resistant to many mild chemicals, oils and water, and protects the concrete surface from the growth of algae and fungi. It is a high-quality and low-cost intermediate coating material.
Application characteristics:
Environmentally friendly and low composition with higher than % solid content
High filler content and low cost
Resistant to mild chemicals, oil and water
Strong, tough and high hardness
Provide good adhesion between primer and topcoat
Improve the overall wear resistance and impact resistance of the concrete floor
Can be applied to new and old concrete surfaces
Application method:
When applying a coating, surface preparation is the most important step. Remove all residues to expose the base surface. If necessary, clean the construction surface with sufficient water and wash with % dilute hydrochloric acid solution. Wash with plenty of water. After the surface dries to a saturated state, use cement mortar or our b repair composition to fill all cracks, honeycomb holes, etc., and allow the surface to dry completely before polishing and leveling it. Use a brush or roller to apply the paint to the treated surface. When the surface of the coating film is dry to the touch, accurately mix Part B and A to obtain a uniform concentration of liquid, and scrape the first coat on the primer. , allow the coating to solidify for an hour, then scrape-coat the second coating on the first coating, preferably in a direction perpendicular to the first coating, and so on until the required coating thickness is reached. During the curing process of the system, pay attention to prevent the impact from mechanical vibration, water splash, direct sunlight, and heat sources.
Scope of application:
Industrial manufacturing facilities, warehouses and airports
Chemical and pharmaceutical plants
Outdoor stadiums and swimming pools
Workshops, laboratories and parking lots
Internal and external walls, roads and bridges
Easy maintenance and low cost floor
We can provide customers with floor coatings and undertake epoxy floor project construction.