Save time and effort, common knowledge when purchasing green storage packaging and coating machines

型号：

wt-5080

工作转速：

360转/分

草捆重量：

15-65kg

b >< b The main structural performance and working principle of Shandong Wanteng Machinery’s fully automatic straw silage baling and wrapping machine
< b >：
><

b >< b >The integrated silage baling and wrapping machine is improved on the basis of the second generation silage baling machine and wrapping machine. This set of equipment greatly reduces labor costs, low cost and high return, which is better than that of silage baling and wrapping machines. The pool greatly reduces costs and is not subject to environmental storage restrictions.
The all-in-one silage baling and wrapping machine consists of two parts: baling and wrapping. When starting to use the all-in-one machine, we should first put the hemp rope on the baler, thread the hemp rope and put it into the clamping tube. , then insert the film feed roll into the support shaft of the film feed frame in the direction required by the instruction manual, and put it in place. First, manually feed the fixed bin through the front of the machine. When the bale is large enough that the fixed bin and the movable bin are in contact with a certain density, The inert roller above the movable bin and the signal wheel on the left will rotate evenly. The operator moves the winding clutch handle, and the machine begins to reciprocate the rope bundling. After wrapping the rope for one week, the hemp rope is automatically cut off, and the bin is immediately opened and the bale is released. The conveyor belt falls directly onto the rotating frame of the wrapping machine. Pull the film out by hand and activate the rotating button. The rotating frame drives the bale to rotate. The operator should quickly and simultaneously press the film to the middle of the bale and rotate with the bale. for one week, and then immediately let go, the silage film gradually wraps around the bale layer by layer, and the bale automatically rotates with the rotating frame. When the wrapping reaches the set number of layers (such as three layers), the clutch automatically disengages , the rotating frame stops, the operator cuts the forage film between the bale and the film transport frame, presses the broken end of the forage film into the overlapping end of the bale, and then takes the wrapped bale out of the wrapping machine The bottom layer should be placed neatly, and the maximum stack should not exceed four bags. Because it is too high and heavy, it will easily deform the bottom layer of the film, causing air to enter, thus causing the forage to deteriorate and become moldy. <

b >< b ><
b >< >Wanteng brand silage baling and wrapping machine is suitable for corn stalks, alfalfa, sugar cane, tail leaves, sweet potatoes, vines, reeds, bean sprouts, and sand. Silage, which is made by adding water to dry straw and packaging it with bacteria, can be stored in microorganisms. It has a high commercial value, turning waste crops into treasure, improving the utilization rate of resources, and making up for the lack of sources and quality of forage in animal husbandry. It has low defects, reduces the cost of feeding, improves the output and quality of meat or milk, and enables the pasture industry to become commercialized.
><

b >< >Wanteng brand< silage baling and wrapping all-in-one machine
>
< > has an aluminum alloy pressure roller, and at the feed port
>
< > the pressure rollers rotate at the same time, allowing the materials to enter the baling chamber evenly and quickly. It has the advantages of fast bundling speed, no clogging of materials, and high density. The coating machine is mainly composed of a base mechanism, a rotating frame mechanism, a film transport frame mechanism, and an electronic control device mechanism. Customers can set the number of coating layers on the coating machine according to the length of silage required: within one year of storage,
>
< > layers of special film can be wrapped (counter setting
>
< >Seconds), a certain package
>
< >layer of special film with a storage period within two years (counter setting
>
< >Seconds can be packaged
>
< > layer), if you have anything you don’t understand, you can call us at any time.
><

b The silage round baler is a fixed baling machine. It is a device that can reliably pick up and bundle the corn stalks after being kneaded by the kneading machine. This product has been carefully designed by technical personnel. It avoids the phenomenon of low density of straw bales after being bundled by other manufacturers and easy to rot after coating. The density of the bundled corn stalks is high, which is convenient for coating silage. At the same time, other dry and fresh grasses can also be bundled. It is a fixed straw round for livestock farming. Baling machine: It is composed of the grass picking up grass pulling drum sprocket transmission mechanism, the rope box and the rope guide rod, the early warning device hydraulic control mechanism and other components. It automatically leads the rope during baling, automatically picks up wheat straw, automatically bundles, and automatically cuts the rope. It can also be changed by adjusting the size of the groove wheel, which is one of the necessary mechanical equipment in the baling and breeding industry.
<