According to the drawings, Yongsheng processes warped and straight F-shaped bridge expansion joints and sends them to Taiyuan, Shanxi in batches.

产品型号：

F型

产品规格：

80型

厂家：

衡水永盛

_Copy
Process warp-head and straight-head bridge expansion joints according to the drawings. Yongsheng sends them in batches to Taiyuan, Shanxi Province
Type expansion joints are expansion joints with a shaped expansion joint side beam section
Type expansion joints are The type expansion joint used in highway bridges is a type of modular expansion joint. It uses hot-pressed steel welded into side beams, then welds anchor plates and horizontal steel bars on both sides of the side beams, and embeds rubber sealing strips on the inside of the side beams to form a complete expansion joint.
Type bridge expansion joints are suitable for bridge joints below the expansion amount. According to the expansion amount, they are divided into: type, type, type. That is to say, the type is suitable for joints with an expansion amount of , the type is suitable for joints with an expansion amount of , and the type is suitable for joints with an expansion amount of .
Type bridge expansion joints are also divided into straight head and warped head expansion joints. The purpose of setting up the expansion joints is to prevent the accumulated water in the rubber sealing belt from flowing to the pier. The expansion joints of the expansion joints can be designed in different styles (lever length and angle) according to different road surfaces. The expansion joints are generally placed inside the anti-collision wall. .