Where to buy building waterstop steel plate waterstop in Yichun City

规格：

300/400

When constructing rubber waterstops, specific attention should be paid to the following aspects: When construction workers are tying steel bars and formwork, the buried rubber waterstop must take reliable fixing measures to avoid displacement when pouring concrete and ensure water stop. Correct position of the belt in the concrete. When fixing the rubber waterstop, holes can only be made in the permitted parts of the waterstop without damaging the main body. The fixing method of the waterstop should be carried out according to the construction specifications required by the design. Commonly used fixing methods include: using additional steel bars to fix special clamps, fixing with lead wires and templates, etc. No matter what fixing method is used, it is necessary to ensure that the waterstop is positioned accurately, without damaging the effective part of the waterstop, and to facilitate concrete pouring. They should be connected as a whole in the factory as much as possible. If due to manufacturing process, transportation conditions, etc., it is necessary to connect on site, hot-pressed vulcanized gluing (rubber waterstop) or welding (plastic waterstop) should be used. The appearance of the joint should be smooth and smooth, and the tensile strength should not be less than % of base material. The so-called overlapping without any treatment is absolutely not allowed. The various cross-connection points of the rubber waterstop must use accessories produced by our Chenglin Company to ensure that on-site connections are only made on straight sections during construction. Flexible material with sufficient deformation ability and good bonding properties with concrete.