Where to buy water-stop steel plates in Pingxiang [manufacturer direct sales]

规格：

齐全

&
During the construction process of the rubber waterstop, since there are many sharp-edged stones and sharp-edged steel bars in the concrete, when pouring and positioning the waterstop, attention should be paid to the impact of the pouring to avoid Excessive force pierced the rubber waterstop. If any rupture is found, it should be repaired in time. Otherwise, when the joints are deformed and subjected to water pressure, the ability of the rubber waterstop to resist external forces will be greatly reduced. When positioning the rubber waterstop, be sure to keep it flat at the interface, and do not allow the waterstop to roll or kink. If it is found to be twisted and unable to unfold, it should be adjusted in time. When casting a fixed waterstop, the waterstop should be prevented from deflecting to avoid shortening on one side and affecting the waterstop effect. When pouring concrete, it must be fully vibrated to prevent the water stop from being poorly combined with the concrete and affecting the water stop effect. The waterstop joints must be well bonded. If the construction site conditions are suitable, the hot vulcanization method can be used.