Yibin community swimming pool water treatment equipment quotation swimming pool automatic dissolver swimming pool filtration equipment

&Yibin Community Swimming Pool Water Treatment Equipment Quotation Swimming Pool Automatic Dissolver Swimming Pool Filtration Equipment Therefore, the fatty substances continue to drill into the depth of the filter layer, and eventually occupy the entire filter layer. At this time, the fatty substances will be repelled by the entire filter layer. If it cannot be captured by the filter at all, the pool water will become turbid, and even repeated backwashing cannot improve the water quality. This situation is especially easy to find in warm and hot pools. At this time, the enzyme clarifier should be strengthened to embed destabilization through contact filtration to prevent the filter layer from accumulating rejection energy. 5. Diatomite filter Because the filter layer of diatomite is short, its ability to capture fat is weak. Fat easily penetrates the filter layer and adheres to the support mesh, blocking the mesh of the support mesh, resulting in a reduction in the filtering area. , the pressure is easy to rise, and backwashing occurs frequently, causing waste. On the other hand, the fat adhered to the support net will be sticky, preventing the diatomaceous earth from falling off during backwashing, so that the backwash pressure accumulates too much. Large, the support mesh cover is prone to breakage of the sewing thread and leakage of diatomaceous earth. Therefore, the diatomite filter support mesh needs to be cleaned regularly with filter cleaning agent to protect the filter life. & Yibin Community Swimming Pool Water Treatment Equipment Quotation Swimming Pool Automatic Dissolver Swimming Pool Filtration Equipment Paper Core Filter (r) mainly uses the pore size difference between pollutant particles and fibers as a blocking action. Because it is made of polyester fiber, under pressure When rising, the work of pumping out, soaking and flushing should be done. Otherwise, it is easy for the pollution particles to penetrate deep into the filter material, making it difficult to clean, resulting in poor filtration effect.
Generally speaking, open-air swimming pools no longer attract most people’s interest in swimming when the temperature drops to around 10 degrees Celsius. At this time, for the sake of economic efficiency, the pool will begin to be closed, which is the beginning of the so-called winter maintenance (rz ), in areas where certain climate conditions may freeze, it is mainly used to protect the pool or unit parts from rupture due to expansion of the water volume when the water temperature drops and passes the freezing point. Others are used to maintain the landscape and prevent the breeding of mosquitoes and flies. They are the main work preparation objects, and their respective descriptions are as follows
. Adhesive membrane swimming pool: Since the adhesive membrane is made of a waterproof layer floating on the supporting surface as the main surface material, it is easy for surface water to penetrate into the adhesive without the pressure of water body. A situation similar to a water bed occurs between the membrane and the supporting surface. Yibin community swimming pool water treatment equipment quotation swimming pool automatic dissolver swimming pool filtration equipment,