Year1
- 外观：
- 乳白色
- 固含量：
- 20-80%
- 比重：
- 1.0
Release agent
This product has strong release force and does not accumulate dirt on the mold. The surface of the product is smooth, odorless and non-toxic. Compared with other water-emulsion release agents, it has better safety and product appearance than organic silicone release agents. .
Main uses
On concrete products, this product is applied or sprayed on the inside of the formwork before the formwork is installed. It can be easily separated from the concrete surface when removing the formwork, improve the quality of the concrete surface and increase the number of formwork turnover times. It is suitable for making cement pipes, high-pressure cement pipes, bridge pipe piles, tread floors and all components in buildings.
Widely used in the demoulding of rubber or plastic products (brake plate screw plugs, etc.).
Extruded rubber products (such as lubricants for conveyor belts)
Can be used as brightener components for automobile furniture to provide good brightness with the smallest amount.
Technical indicators
Appearance
Milk white
Solid content
Specific gravity
Value
Emulsifier type
Nonionic
Use Method
)
According to the purpose, it can be diluted with water up to 100 times. Customers can also adjust it according to the actual situation. Dilute it with water according to the required concentration and then spray it with a spray gun or apply it evenly on the mold with a brush/rag. Just go up.
)
Do not add any additives to the concentrate except water
)
Spray the release agent on the pre-treated or cleaned mold at normal processing temperature several times to ensure that the mold A uniform release film is formed.
)
It can be demoulded several times after each spraying.
Precautions for packaging and storage
After using the plastic drum packaging, store the drum with a tight lid in a cool, dry place and transport it as non-dangerous goods.
WhatsApp
