Year1
- 外观：
- 乳白色
- 固含量：
- 20-80%
- 比重：
- 1.0
Release agent
This product has strong release force, no dirt on the mold, smooth surface of the product, odorless and non-toxic. Compared with other water-emulsion release agents, organic silicone release agent has better Safety and product appearance.
Main uses
On concrete products, this product is applied or sprayed on the inside of the formwork before the formwork is installed. It can be easily separated from the concrete surface when the formwork is removed, improves the surface quality of the concrete, and increases the turnover times of the formwork. It is suitable for making cement pipes, high-pressure cement pipes, bridge piles, tread slabs and all components in buildings.
Widely used in demoulding rubber or plastic products such as brake plates, screw plugs, etc.
Lubricant for extruded rubber products such as conveyor belts
Can be used as a brightener component for automobile furniture, providing good brightness with the smallest amount.
Technical indicators
Appearance
Milk white
Solid content
Specific gravity
Value
Emulsifier type
Nonionic
Use Method
According to the purpose, it can be diluted with water up to 100 times. Customers can also adjust it according to the actual situation. Dilute it with water according to the required concentration, and then spray it with a spray gun or apply it evenly with a brush/rag. Just place it on the mold.
Except for water, do not add any additives to the concentrate
On the pre-treated or cleaned mold, spray the release agent several times at normal processing temperature to Ensure that the mold has a uniform release film.
Each time of spraying, it can be demoulded several times.
Packaging and Storage Precautions
Packed in plastic barrels, cover the barrel tightly after use, store in a cool and dry place, and transport as non-dangerous goods.
Hongsi Chemical’s three major internal page advantages
WhatsApp
