Factory direct sales MRV110-80 vortex blower

200：

20

[Vortex high-pressure air pump] Basic description The impeller of the vortex air pump is composed of dozens of blades. It is similar to the impeller of a huge gas turbine. The air in the middle of the impeller blades is affected by centrifugal force and moves toward the edge of the impeller, where the air enters the annular cavity of the pump body and circulates again in the same way from the starting point of the blades. The circulating air flow generated by the rotation of the impeller leaves the air pump with extremely high energy for use. The fan adopts a special motor, has a compact structure, small size, light weight, and low noise. The air source is water-free and oil-free.
The high-pressure vortex air pump's exclusive/bearing rigidity is more outstanding and is more suitable for long-term non-stop operation. One machine is made in China and two machines use the best angle blade design to allow us to have greater air volume and higher air pressure.
Taiwan’s vortex air pump’s user-friendly independent blade connection plate allows you to avoid direct damage to the bearings even when directly extracting waste materials. It adopts German air return technology and can operate freely even if the air outlet is squeezed. Complete compliance with The air volume and pressure are small during operation.
The unique air inlet silencer cotton design of the vortex air pump makes our fan run quieter! The excellent computer dynamic balance correction system allows our fan impellers to run freely even when rotating. The special heat insulation device and the motor extension shaft are treated with high temperature resistance to allow our fans to withstand temperature jumps of up to 10 degrees.
Textile equipment, vortex air pump, high-speed sock knitting machine, coating thickness control and ensuring uniform thickness, moisture removal, drying and drawing machine.
The plastic auxiliary machine and central feeding system are used in the casting machine to ensure high-speed production and ensure uniform cooling of the cast film
The air knife on the roller forms a thin air layer on the surface of the film and the cooling roller. The vortex air pump cools the film evenly and is used for the vacuum feeding, drying, dehumidification and central feeding system of the injection molding machine.
Computer monitors, LCD monitors, printed circuit boards and other products can be used in printed circuit board equipment using vortex air pumps for cleaning, cutting, water drying and other
products.
Used in wire and cable equipment, it can remove water, oil, dry, and suppress static electricity, such as water removal from precision copper tubes in air conditioners.
In the coating equipment, it can effectively control the thickness of the coating and ensure uniform thickness. It can be dried to remove moisture over a large area at high temperature.
The thickness of the drying coating can be controlled by cutting water, drying, removing oil and other metal surface treatments after electroplating.
The vortex air pump is used in food and beverage filling equipment such as pneumatic conveying of cans, beverage bottles and various packaging food coding or water cutting and drying before labeling

Printing equipment, screen printing machinery, glazing machine, the ink dries instantly within seconds after printing.
Air treatment equipment that can be used for the collection, purification and recycling of toxic and harmful gases and gas detection equipment for atmospheric environments.
Especially suitable for cleaning equipment such as ultrasonic cleaning machines, electronic industry board cleaning and drying machines, tunnel car washing machines (car washing machines), commercial dishwashers, glass washing machines, etc.
The vortex air pump can be used for fish farming in water surface aeration, oxygenation grids and oxygenation systems.
Used in tires and rubber equipment to remove moisture/oil, dry and suppress static electricity.