Hebei Xinda dust collector manufacturer is the first choice when buying PL-1600B single machine bag dust collector.

型号：

PL-1600B

除尘率：

99.5（%）

Hebei Xinda Dust Removal Manufacturer is the first choice when buying a stand-alone bag dust collector
1. Stand-alone bag dust collector
Working Principle
Dust-containing gas enters the box and is filtered by a flat cloth bag filter, and the dust is Retained on the outer surface of the filter bag, the purified gas enters the fan through the filter bag, and is sucked in by the fan and discharged directly into the room (it can also be discharged to the outside via a pipe).
As the filtration time increases, the dust attached to the outer surface of the filter bag also increases, and the resistance of the filter bag also increases accordingly, thus affecting the dust removal effect. An automatic dust cleaning mechanism is used for regular vibration cleaning or manual cleaning. After the dust mechanism stops, it will automatically vibrate for tens of seconds to shake off the dust stuck to the outer surface of the filter bag. The dust falling into the dust collection container (drawer) is manually pulled out and removed.
2. Instructions for use of series single-machine bag dust collectors
Bag dust collectors
should be installed near the mechanical equipment that generates dust, and the user should follow the air inlet size on the dust removal group. You can prepare metal or plastic vacuum ducts and vacuum hoods by yourself (you can also contact the manufacturer when ordering to prepare them on your behalf).
Before starting work, check whether the access door, dust outlet door and air duct connection system are sealed to avoid leakage and reduce the dust collection effect.
The voltage of the bag dust collector
is three-phase AC 380 volts. It can be used after connecting the power supply to the external wire on the unit. During initial operation, you should pay attention to whether the fan is rotating forward ( If it is reversed, the air volume will be very small, and the power wiring needs to be changed).
The electric control box cover should not be opened at will during work. If you need to adjust the cleaning time or check the circuit, you should stop the machine or cut off the power before starting work.
According to the nature of the dust and the size of the dust-holding capacity, the dust should be regularly vibrated and cleaned. Generally, the vibrating should be done three to four times per shift, and it is appropriate to vibrate for seconds each time to ensure the normal operation of the unit.
According to actual needs, clean dust regularly. When cleaning the dust in the dust collector, you only need to open the sealed dust outlet door and pull out the drawer when the fan and dust cleaning mechanism stop working.
In order to ensure that the equipment is in the best working condition, it should be as close as possible to the source of dust. Generally, the connecting pipe should be one and a half to two meters long, which may be shorter, and elbows should be minimized to avoid increasing resistance loss.
The dust cover is a key accessory to ensure that the unit is in optimal condition. The user should design and manufacture the dust cover based on the dimensions of the workpiece and the nature of the dust, and in accordance with the principles of accessibility, proximity, smoothness, sealing and convenience. Ideal vacuum hood.
When purchasing air box pulse dust collectors, Hebei Xinda Dust Removal Equipment Co., Ltd. is your first choice. We will use the best quality products and the most affordable prices to look forward to your visit!