Metal nameplate embossed machine
Metal nameplate embossed machine
Imprinting effect
Use
Purpose
To emboss embossed characters on metal signs, such as changing parameters Model date, batch number, serial number, serial number, etc.
Typical Applications
Suitable for various equipment
manufacturers, steel distribution departments and other units to produce machine signs.
Working principle
The alloy steel characters that have been heat-treated by high-frequency quenching are embossed with letters, numbers or graphics of a certain depth on the metal sign under the action of external force
The heat-treated steel character plate It can be rotated to the required letters or numbers, and the typeface can be easily replaced
The line spacing of the marking position is infinitely adjusted by a special mechanical mechanism
Features
Small size, light weight, flexible operation, convenient and neat printing The lines are uniform and clear, and the font sizes are diverse and complete.
Built-in character code
Write English letters (number)~
Arabic numerals (number)~
Symbols)
/
Special characters can be customized< br/> Character
Height
Character size
The maximum is
The minimum is
*
.
>Applicable workpieces
Machine nameplate/machine nameplate or
metal sheet
Thickness requirements
Aluminum within stainless steel and tinplate.
Character selection
Daisy character turntable
Character spacing
Determined according to the character size, the standard is
Operation mode
Manual
Embossed character line Number
According to nameplate requirements.
Position indication
Indicator light or sample card
Operation method
Insert the card to be imprinted into the card slot at the front of the card frame
and use a card holder to secure it Just clip the blank nameplate into the card slot.
Turn the code selection wheel
to move the character to be imprinted to the character pointer
position.
To select the upper and lower positions of the nameplate to be printed, you can directly push and pull the card frame
to select.
Select the left and right positions of the card. Move to the right to push the card frame directly
To move to the left, press the handle lightly
(about an angle) and then reset the card frame
You can move one space to the left. After the above steps, you can position the card at the position to be imprinted.
The card is imprinted from left to right. After each imprinted character, it will automatically move one space to the left. If a space is needed, press to proceed.
Character embossing control
Press it to the bottom and then reset it.
If the printed characters are too deep or shallow and do not meet the requirements, they can be adjusted through the adjustment screw in the adjustment hole at the bottom of the machine.
Volume
Volume
Net weight of machine
Year1
WhatsApp
