cement curing tank

温度：

20±1

型号：

TKY-B

An overview of the cement curing tank
The all-stainless steel constant temperature cement curing tank produced by Nanjing Jiedi
is specially used for the standard maintenance of cement test blocks. It is independently controlled by a microcomputer and automatically monitors and controls the temperature of the curing water in each tank. The fin-type refrigeration microcirculation water pump can be used for automatic cooling and cooling, so that each curing tank can reach the standard curing temperature ℃. It is a new type of cement test block curing equipment that is ahead of the international level.
Technical parameters of the second cement curing tank
Product model
and specifications
Capacity
Working voltage
Refrigeration
Power
Heating
Power
Temperature
Accuracy
Temperature control
Range
Dimensions
Stainless steel cement curing tank
Grid/group per layer Grid
Three layers in total, block/grid

External air conditioner
℃
Stainless steel constant temperature cement curing tank
Grid/group per floor
There are three layers in total, blocks/grids

~
℃

The working principle of the three-cement curing tank
Through the constant temperature unit that comes with the tank group, the The water temperature in the constant temperature water tank is controlled within the required temperature, and is sent to the curing water tank through the constant temperature water pipe of the circulating pump. Each curing water tank is equipped with an independent display temperature control system, and the temperature control sensor is directly placed in the water of each curing water tank. When the temperature of a certain cell in the curing water tank group deviates, the temperature computer controller of each cell controls the opening of the constant-temperature water circulation pump. The constant-temperature water conducts temperature through the circulation of the curing water tank, so that each cell of the curing water tank can achieve constant temperature control. The temperature control uniformity reaches below ℃.
Product features of the four-cement curing tank
The independent machine has its own refrigeration and heating unit, independent microcomputer temperature control, and high precision in curing water temperature control. The curing tank group is truly not directly affected by the temperature of the laboratory and the environment. The temperature of the laboratory working environment can be adjusted according to human comfort needs.
The direct contact conduction through water as the carrier system is superior to the original air medium conduction, the heat exchange efficiency is greatly improved, the temperature adjustment speed is accelerated, and energy is saved.
The tank body is relatively independent, which increases the versatility of the maintenance tank.
When the ambient temperature is too low, the ceramic heating element is used to compensate for the constant temperature, which effectively solves the problem of temperature fluctuations in the maintenance tank when the constant temperature unit is frosted and defrost, and the energy efficiency ratio is improved.
Blog Contact