Air Cooler

Air cooler
Air cooler
is a sealed type, closed cycle. The water from the equipment enters the water storage tank after passing through the observation water tank. The softened water is driven into the heat transfer tube group by the pipeline pump and forced air cooling. After cooling, it enters the water distribution bag. The water distribution bag is equipped with water pipes corresponding to the equipment, and then passes through the soft water. Pipes or hard pipes are respectively connected to the water inlets required by the equipment.

The air cooler is an independent set of equipment, which occupies a small area and can be placed indoors or outdoors according to user requirements. It can be connected to the equipment with hoses or steel pipes. The water pressure can be adjusted through the regulating valve and is displayed by the pressure gauge on the water distribution bag. Before use, close all the cut-off doors entering the high-frequency equipment. After passing through its own circulation, the water will be drained by the drain valve under the water distribution bag to ensure the use of the equipment. There is no debris in it, so it will not cause blockage.
Characteristics of air cooler: Air cooler uses air as the cold medium to pass through the outside of the heat transfer element (fin tube), and cools and condenses the hotter medium (gas, liquid) through the inside of the heat transfer element. Exchange equipment. , The heat transfer element of the cooler adopts advanced internationally introduced technology rolled finned tubes. , Single metal rolled tube has no contact thermal resistance, good heat transfer performance, high strength, thermal shock and mechanical vibration resistance, and good thermal expansion performance. . The contact thermal resistance of the bimetal rolled sheet tube is low, maintaining a stable low value within a large temperature range, and the heat transfer coefficient is high. The base (liner) is protected from corrosion by the outer aluminum tube wall, and is resistant to temperature sudden changes and vibrations. It has good resistance, large heat transfer area per unit length, high heat transfer, reliable structure and long service life. The fins of the rolled fin tube are smooth and burr-free, without wrinkles, not easy to accumulate dust and scale, and are easy to clean and remove surface water. It has low fluid resistance and can maintain good heat transfer performance for a long time. . The heat pipe with a rolled sheet tube as the shell is a new type of superconducting element. It has a unique heat transfer method and excellent performance. The heat pipe heat exchanger has a simple, lightweight structure and is easy to install and use. It is often used for drying and preheating in various industries
Air cooling The spray device of the machine is prepared for the hottest weather in summer. It consists of a spray pump, a water tray, a spray pipe, etc. to form an independent circulation system. A nozzle is added between the fan and the heat transfer tube, and a small amount of water is sprayed onto the fin surface of the heat transfer tube to reduce the surface temperature below the atmospheric temperature, thereby meeting the heat exchange temperature difference requirements. The water sprayed onto the surface of the heat transfer tube After vaporization, a large amount of heat can be taken away, which supplements the heat dissipation capacity.
The fan uses an axial flow fan with large air volume, low noise and low power, and the circulation pump uses a pipeline pump. Therefore, under the same head and flow conditions, the motor power of the centrifugal pump used in the conventional water cooling system is the same as that used in the air cooler. The sum of the power of the fan and circulation pump is basically the same. This air cooler is equipped with a distribution box, which can control the circulation pump, fan, spray pump and digital temperature display, and can also interlock with the equipment.
Advantages of air cooler:
,
No need for pool or cooling tower, and it occupies a small area.
, purified water circulation, clean water, no scale.
, closed circuit circulation, no debris will enter, no moss will grow, and the pipeline will not be blocked.
, small size, good integrity and easy installation.
, using closed cycle, very little water consumption.
, can avoid equipment failures caused by condensation water in summer.
The water storage tank is small in size. High-frequency waterway antifreeze can be used in winter to avoid waterway failure caused by freezing of the high-frequency system.
This equipment can still continue to cool in the event of a sudden power outage or water outage.
, low power consumption.