Shantou Class A soft film ceiling, fireproof translucent film, Class A translucent film

Shantou grade soft film ceiling fireproof light-transmitting film grade light-transmitting film manager mobile phone
Engineering consulting
Demei soft film ceiling is currently widely used in the decoration industry, but the details are still worth our attention On behalf of the company, I will briefly introduce the details to you
Demei soft film ceiling first goes to the construction site to see if there are conditions for installing the keel, that is, to see if the on-site wall has completed the woodworking part and whether it is qualified. The plastering part needs to be completed first. Pay special attention to the woodworking part that must be made according to our requirements. The size of the openings such as the light vents must be processed in advance.
Demei Soft Film Ceiling Site Conditions The licensee entering the site for construction must first fix the carpentry parts according to the drawing design requirements. The special keel keel must be at right angles, smooth and smooth, and the joints must be level and dense.
For Demei Soft Film Ceiling, please note that the light pipe panel of the light frame air outlet must be level with the surrounding keel and must be firm and stable without swinging.
Demei Soft Film Ceiling Smoke Ceiling Lamp must be positioned first and then made into a wooden base frame. The bottom surface of the wooden base frame must be polished smooth and note that if the horizontal height is too low, the traces of the base frame may easily be highlighted.
Before installing Demei Soft Film Ceiling, carefully check whether the keel joints are firm and smooth. White tape should be attached to the sprinkler head and the air outlet should be properly handled. When installing the ceiling, first fix it from the middle to both sides. Pay attention to the dimensions of both sides. Pay attention to the straight welding seams. Finally, make the corners and make sure they are flat and smooth. After the four sides are completed, trim off the excess ceiling.
Achieve perfect edge finishing effect.
Finally, clean the surface of the soft film ceiling with a clean towel.
Therefore, Demei soft film ceiling is still worth exploring during the construction process. We hope that our efforts can satisfy every customer.
Open the light pipe panel of the air outlet. Find the position of the light pipe panel of the air outlet. Install the soft film on the special keel in the same way as the surroundings. Pay attention to the smooth corners. After it is done, just cut off the excess smallpox.
Open the light hole and mark the position of the light hole. Carefully and accurately stick the light ring to the bottom of the soft film. Once it is firm, remove the excess ceiling.