JS waterproof coating polymer cement waterproof coating waterproof coating wholesale

1 Product Introduction
Bilite polymer cement waterproof coating is an organic liquid material composed of natural resin polymer emulsion and various additives, and then an inorganic powder composed of high-aluminum high-iron cement and various additives. A two-component water-based waterproof coating made from a scientific formula. The coating has excellent weather resistance, super strong adhesion and pressure resistance, is non-toxic, odorless, has a short construction period, is economical and practical.
2
Product Features
Water-based paint is non-toxic, harmless, pollution-free and environmentally friendly paint that can be used in drinking water pools.
The coating film has high tensile strength and good water and weather resistance.
Can be applied to wet substrates and bonded firmly.
Cold construction is easy to operate and the moisture content of the base layer is not limited, which can shorten the construction period.
Can be used in combination with a variety of other waterproof coatings or membranes and is suitable for waterproofing projects with different waterproof levels
Three scopes of application
Suitable for waterproofing, anti-seepage and anti-seepage on roofs, balconies and exterior walls of new and old buildings Moisture proofing works.
The coating film is waterproof for underground projects such as basement bathrooms, underground garages and tunnels.
Luqiao pool swimming pool water conservancy project coating waterproofing project.
Four technical instructions
Five construction points
Base course treatment The surface of the base course should be smooth and solid without sharp corners and exposed water, and waterproof joints should be treated according to the design requirements. Oil stains must be removed. Repair low and damaged areas.
The ingredients, liquid, powder, and water are proportioned in proportion. The amount of water added can be adjusted appropriately to adjust the coating viscosity to meet the construction requirements of different parts of the facade and plane.
How to mix the paint: First, pour the liquid material into the mixing bucket and slowly add the powder while stirring. Stir thoroughly until it becomes a slurry without lumps before use.
Additional waterproofing layer for details should be filled with sealing material in the remaining grooves according to the design requirements. Detailed details such as the yin and yang corner tube roots should be painted with Bilit polymer cement waterproof coating multiple times. Underground projects should be sandwiched with a layer of matrix reinforcement material. .
The waterproof coating film for large-surface waterproofing layer construction should be applied multiple times and should be completed at least four times. The coating time for each coat should generally be extended in winter. The thickness of each coating should be approximately /㎡. For facade construction, it is advisable to add no or less water to prevent the paint from flowing, making it difficult for the thickness of the facade to reach the designed thickness, and causing cracks due to excessive accumulation of materials at the inner and outer corners. When paving the carcass reinforcement material, the carcass should be paved flat without wrinkles and the overlap should be no less than that during construction. Apply paint first and then apply paint again on top.
Construction Precautions
This product should not be constructed when the temperature during construction must be higher than in rainy weather or when there is open water on the base layer.
The waterproof coating film should be completely dry before surface decoration construction can be carried out. The complete drying time is approximately 100% in humid environments and should be appropriately extended.
Packaging and Storage
The powder components of the product are packaged in bags. Liquid powder is packed in/barrel.
The liquid material of this product must be sealed and stored in a cool place as above. The powder material must be stored in a dry place. The product has a shelf life of one month and can still be used if it passes the expiry date and passes the test.