[Factory direct sales] Adhesive Gubolang stone adhesive

Stone adhesive. Implementation standard: - Ceramic wall and floor tile adhesive
. Product description
. Stone adhesive is a polymer-modified cement-based adhesive, model: heavy brick adhesive The mud is made of a reasonable proportion of polymer additives, high-standard cement and fine slip. It has strong adhesion and flexibility. It is especially suitable for indoor and outdoor wall pasting of large ceramic tiles, vitrified stones, natural stone slabs and other materials.
. Product advantages
:
. Extra strong adhesion, especially suitable for pasting indoor and outdoor walls of large ceramic tiles, vitrified stones, natural stone slabs and other materials.
. Light steel frame system boards, such as gypsum board, Ete board and other base surfaces are pasted with indoor tiles
. It has good anti-penetration and anti-aging properties
. No wet bricks are needed during construction. ,Convenient.
. Use grout to paste to reduce the weight of the wall
. Can be directly used to level rough and uneven base surfaces or smooth cement floors
. Scope of application
. Suitable for indoor large-scale installations Indoor and outdoor wall pasting of ceramic tiles, vitrified stone, natural stone slabs and other materials.
. Construction technology
. Base surface treatment
. The base surface must be strong, flat, dry, clean and free of oil
. For hollow, loose base and protruding objects, first Eradicate and repair uneven base surfaces first with polymer cement mortar
. Ingredients
.Powder: water. (Weight ratio)
..Pour the water into the mixing barrel first, then add the powder, and then use an electric mixer to stir until it is uniform and powder-free
..If the glue is allowed to stand for a few minutes, stir again. Can increase strength
. Construction
. Use a toothed scraper to evenly apply the glue on the work surface, about 10 times each time, then knead the tiles on top and use cross glue The granules control the brick joints to be straight and uniform in size. If caulking agent is used to fill the joints, at least a gap should be left between bricks.
..If it is used for pasting ceramic tiles or stones with deep grooves on the back, in addition to grouting the working surface, it should also be applied on the back of the brick or the back of the board.
.