Year1
- 品名：
- 加固砂浆
- 规格：
- 25kg/袋
- 品牌：
- 恒众鑫
Anshan polymer reinforced repair mortar manufacturer's latest price contact manager Ma's phone number
Polymer reinforced mortar
Polymer reinforced mortar is a modified cement mortar formulated with imported latex powder and special additives. By combining it with steel mesh, a reinforcement layer with high strength and good toughness can be obtained, greatly improving the strength of the original components. It is widely used in the reinforcement of reinforced concrete flexural and large eccentric compression components such as buildings and bridges.
1. Product features:
Excellent fire resistance, high temperature resistance, corrosion resistance and aging resistance.
, high strength and good plastering operability.
Good bonding performance with original concrete structure.
, no shrinkage, basically no cracks.
It has poor permeability to carbon dioxide, chloride, etc., which can prevent carbonization of concrete and corrosion of steel bars inside the concrete.
Its mechanical properties are similar to those of concrete, and its freeze-thaw resistance and durability are very good.
It has good resistance to other chemicals, and this material is non-toxic and harmless to the human body.
2. Scope of application:
Reinforcement plastering of concrete structures.
It is permeable and can be used to reinforce stainless steel stranded wire mesh.
Used to repair defects such as honeycombs, holes and exposed reinforcements on the surface of concrete structures.
3. Physical performance indicators:
4. Usage method:
Add water and stir according to the water-cement ratio: -.
Take a clean bucket, add a certain amount of water, stir while pouring, use a low speed (less than revolutions per minute) electric stirrer
Stir for about 3 minutes with a mixing rod, let it stand for a few minutes and stir again. Ready to use.
Just plaster or repair according to the specific construction requirements.
Each ingredient should be used up within hours.
If the ambient temperature is higher than 3℃, shading equipment should be installed to prevent the material from losing water when exposed directly to the sun.
Maintenance
? Hours after completion of construction work in summer, water should be poured in time, curing agent should be sprayed or covered with wet straw bags for maintenance, and the surface should be kept moist for 3 days.
?After the winter construction work is completed, it should be immediately covered with plastic film and covered with quilts for moisturizing and maintenance.
?Hours after the summer construction work is completed, water should be sprayed in time, spray curing agent or covered with wet straw bags for maintenance, and keep the surface moist for 3 days.
?After the winter construction work is completed, it should be immediately covered with plastic film and covered with quilts for moisturizing and maintenance.
5. Packaging, storage and transportation
?/bag, packed in a composite paper bag lined with plastic
?Store in a dry and cool place. The storage period is three months from the date of production
?Extended use must be inspected before use
?This product is safe, non-toxic, non-flammable, and can meet the transportation requirements of general roads and railways.
WhatsApp
