Dandong polymer waterproof cement manufacturer

品名：

防水益胶泥

规格：

20kg/袋

品牌：

恒众鑫

Dandong polymer waterproof cement manufacturer contact manager Ma's phone number
1.
Product overview:
Polymer waterproof cement is made of polymer materials, inorganic silicate gelling materials, fine It is a single-component, dry powder made by mixing aggregates and various additives through a special process. It is a multi-functional, high-performance, non-toxic product that integrates bonding, wall interface treatment, waterproofing and leak-stopping functions. Toxic, odorless, green and environmentally friendly new building materials. The product complies with the requirements of the National Standard I - "Polymer Cement Waterproof Mortar" and is widely used in the domestic and foreign construction industries for rigid waterproofing and anti-seepage of walls, scraping of paint finishes, pasting of facing bricks, and exterior wall insulation systems. In areas such as interface processing, construction is convenient and fast.
Scope of application
Pasting of various tiles and boards for waterproofing and impermeability decoration projects on interior and exterior walls, floors, basements, swimming pools, water tanks, etc. Products are divided into type I and type II according to their physical and mechanical properties. Type I is mainly used for waterproofing and pasting of moisture-proof layers and decorative tiles and decorative panels with waterproofing requirements. Type II is mainly used for waterproofing and impermeability of various types of buildings and facilities.
Product Features
.Single-component dry powder, easy to use, just mix with water and stir well.
.Good workability, water retention and anti-sag properties, can be used for large-area construction and improve construction efficiency.
3. Extremely strong adhesion and flexibility to prevent cracks, no hollowing, no cracking, no alkali whitening.
.Water-resistant, temperature-resistant, freeze-thaw resistant, non-toxic and odorless, green and environmentally friendly, with thin coating and low material consumption.
.Has hydrophobic function, which can prevent moisture from penetrating through the facing bonding layer.
Construction method
Base layer requirements:
The base layer must be flat and solid. If there are cracks, honeycombs and other defects, they should be repaired first and meet the design requirements.
.The base layer must be clean. Floating dust, dirt, oil stains, etc. on the base surface should be cleaned before construction.
Preparation of mortar:
3. When using, add ~3kg of water for every 100kg of Yiguang dry powder. No additives are needed. Stir evenly into a thick paste manually or mechanically. There must be no Pasta dough. After leaving it for 1 minute, mix it and use it. The mixed clay should be used up within 3 minutes to avoid waste due to hardening and agglomeration.
Engineering application
. Used for kitchen and bathroom wall floors, exterior wall waterproof interface layer, waterproof layer
Interface layer: Apply a layer of benefit on the base layer that has been cleaned and kept moist. The cement mortar is used as the interface layer, the thickness is -, it should be fully spread and squeezed tightly when scraping.
Waterproof layer: After the interface layer is scraped, a layer of Yiguang mortar should be scraped on its surface as a waterproof layer before it is initially set. The thickness is about 100%. When scraping, it should be fully spread, dense, and the moisture-proof layer should be scraped. The direction should be consistent with the interface layer. The moisture-proof layer should be cured after it is finally set. Usually, it should be done when the surface of the moisture-proof layer is white and lacks water. You can lightly sprinkle water with a shower head, several times a day, morning and evening. The curing period does not extend when the waterproof layer is exposed. Less than 3 days. If there is a protective layer or various finishes on the surface, the curing period shall not be less than 3 days.
.Waterproof bonding layer for various facing tiles
Single brick pasting: When pasting facing tiles, use a toothed comb iron trowel to scrape and apply a layer on the cleaned base layer or the back of the brick. The Yiguang mortar is used as a bonding layer, with a thickness of about 100%. It is pasted from top to bottom or bottom to top according to elastic lines or hanging lines. After the bonding layer is finally set, caulking mud is used to seal the joints.
Double-sided coating: When the facing has waterproof requirements, the double-sided coating method can be used. That is to say, scrape and apply a layer of Yiguang mortar on the base layer with a thickness of approximately 100%, and at the same time, scrape and apply a layer of Yiyiguang mortar with a thickness of approximately 10% on the back of the tiles for pasting. After the adhesive layer is finally set, use caulking mud to seal the joints.
The ash on the facing bricks should be cleaned up before final setting to avoid difficulty in cleaning up after drying and contaminating the brick surface.
Precautions
It is prohibited to construct in a rainy environment.
After the ground construction is completed, walking is prohibited for two days.
3. The suitable construction temperature is between ℃ and 3℃.
.The back side of stone slabs such as granite and marble should be roughened. Do not use Yiguang on non-absorbent and vibrating stones such as metal surfaces.
.It is not suitable to add other items such as cement to this product.
Packaging, storage and transportation
. Packed in laminated bags, with a net capacity of /bag.
.The product should be stored in a cool and dry place. Remember to be exposed to the sun, rain, and moisture. The shelf life is one month.
3. This product is a general chemical and can be transported as non-dangerous goods.